Filter
Top Products
RQTX0064
38
Troubleshooting guide
Troubleshooting guide
HDMI or progressive video
There is ghosting when HDMI or
progressive output is on.
≥This problem is caused by the editing method or material used on DVD-Video, but should be
corrected if you use interlaced output.
– When using the COMPONENT VIDEO OUT terminal, set “Video Output Mode” in Picture Menu to
“480i”. (Alternatively, press and hold [CANCEL] to switch to “480i”.)
– When using the HDMI AV OUT terminal, set “Video Output Mode” in Picture Menu to “480i” output
marked with an “¢”. Or, disable the HDMI AV OUT connection and use other video connections.
Make the settings in the following order:
1 Set “Video Mode” in the “HDMI” menu to “Off”.
2 Set “Video Output Mode” in Picture Menu to “480i”. (Alternatively, press and hold [CANCEL] to
switch to “480i”.)
23
23,
26
Pictures not in progressive
output.
≥Select “480p” in “Video Output Mode” in Picture Menu.
≥The unit’s VIDEO OUT terminal outputs the interlaced signal even if “PRG” is displayed.
23
7
Closed captions not displayed. ≥When HDMI or progressive output is on, closed captions will not be displayed. —
Radio
Distorted sound or noise is heard.
“ST” flickers or does not light.
≥Adjust the position of the FM or AM antenna.
≥Use an outdoor antenna.
—
9
A beat sound is heard. ≥Turn the television off or move it away from the unit. —
A low hum is heard during AM
broadcasts.
≥Separate the antenna from other cables. —
Wireless equipment
No sound. ≥Ensure that the digital transmitter is fully inserted into the slot of the main unit.
≥Ensure that the wireless equipment is plugged into the AC outlet and is turned on. Then, check that
“ [W1] ” [and “ [WS] ” ([PT1050])] is displayed on the main unit’s display.
9
10, 13
The indicator on the wireless
equipment keeps flashing
between red and green.
≥There is a power supply problem. Consult the dealer. —
Television displays
“/” ≥The operation is prohibited by the unit or disc. —
“Cannot display group xx, content xx”
≥You are trying to display incompatible contents. —
“This disc may not be played in
your region”
≥
Only DVD-Video discs that include or have the same region number as the one on the rear panel of this
unit can be played.
Cover
page
No on-screen display. ≥Select “On” in “On-Screen Messages” in the “Display” menu. 26
Main unit’s screen saver remains ≥
When using the HDMI connection, audio/video information is continually transferred between the
main unit and the television regardless of which source has been selected on the main unit. This is
normal.
—
0064 En_p28-44.fm Page 38 Monday, February 12, 2007 10:08 AM