RQTX0064
16
Basic play
Basic play
To display the picture from the main unit, turn on your television and change its video input mode (e.g. VIDEO 1, AV 1, etc.).
≥To change your television’s video input mode, refer to its operating instructions.
[Note[
≥DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED.
To preserve the unit’s motor and your television screen, press [∫](Stop)
when you are finished with the menus.
≥Total title number may not be displayed properly on iR/iRW.
Using the main unit
POWER
5 DISC SELECTOR
SELECTOR
TUNING
TUNE MODE FM MODE
MEMORY
MUSIC PORT
VOLUME
SKIP
EXCHANGE
DISC
OPEN CLOSE
12345
SETUP MIC
DISC SKIP
DISC EXCHANGE
SELECTOR
POWER
OPEN CLOSE
OPEN CLOSE
5 DISC SELECTOR
12345
+,
VOLUME
5 Start play.
≥Press [r, s VOLUME] to adjust
the volume.
≥You can enjoy surround sound
when you press [ÎPLII/S.SRD]
to turn on Dolby Pro Logic II
(➜ page 32).
3
Open the drawer and place the disc(s).
≥Load double-sided discs so the label for the side you want to
play is facing up.
≥To load discs on the other trays, press [DISC SKIP] on the
main unit.
≥Play will start from the disc in the front-left position of the
tray.
≥For DVD-RAM, remove the disc
from its cartridge before use.
≥Do not:
–load more than one disc per tray.
–touch the drawer or the carousel while they are in motion.
–rotate the carousel by hand.
–close the drawer by hand.
∫ (Stop)
Press to select a disc directly.
≥You can also select the disc using the remote
control (➜ page 18, Checking and selecting
the disc).
2 Select “DVD/CD”.
1 Power on.
4 Close the drawer.
Press to skip.
Press and hold to
– search during play
– start slow-motion play during pause
(Motion picture part)
≥Press [1] (Play) to start normal play.
Select the
next disc
tray
Exchange the
disc in the
play position
≥The drawer opens and the disc
in the play position comes to the
front-left position.
≥Press the button again to play
the disc after changing the disc
in the front-left position.
SKIP
DISC
—
EXCHANGE
DISC
Change the
other discs
without
interrupting
play
≥Each time you press [DISC
SKIP], you can select the other
trays.
OPEN CLOSE
OPEN CLOSE
SKIP
DISC
Change the
discs
PT950 and 1050_En.book Page 16 Tuesday, December 26, 2006 3:37 PM