Filter
Top Products
RQTX0064
12
Control reference guide
See page references in parentheses.
Aim the remote control at the Panasonic television and press the
button.
[Í TV]: Turn the television on/off
[TV/VIDEO]: Change the television’s video input mode
[r, s]: Adjust the television volume
≥This may not work properly with some models.
≥To operate some other brands of televisions, change the remote control
code.
Aim the remote control at the television.
While pressing [Í TV], press the numbered buttons to enter the
4-digit television code.
If the code is correct, the television turns on or off. If it does not, try
entering another code.
]Note]
Reenter the codes after you change the batteries.
Television code list
Other Panasonic audio/video equipment may start functioning when you
operate the unit using the supplied remote control.
You can operate this unit in another mode by setting the remote control
operating mode to “REMOTE 2”.
The main unit and remote control must be set to the same mode.
1 Press and hold [5] on the main unit and [2] on the remote
control until the main unit's display shows "REMOTE 2".
2 Press and hold [ENTER] and [2] on the remote control for at least 2
seconds.
To change the mode back to “REMOTE 1”, repeat both steps above by
replacing [2] with [1].
Operating the television
(17) (19, 31) (18)(18)
(32) (32)
(32)
(32)
(17)
(
32
)
(18)
(33)
(33)
CANCEL PLAY MODE REPEAT
C.FOCUS
CD MODE
PL
EQ
CH SELECT
SUBWOOFER
TEST
FL DISPLAY
(25)
SETUP
LEVEL
S.SRD
SRD
MUSIC
QUICK REPLAY
AUTO
AUTO
(33)
H.BASS
Select disc’s title numbers etc./Enter numbers (17)
Basic operations for play (16, 17)
Show a disc top menu (20) or program list (21)
Show on-screen menu (22)
Show a disc menu (20) or play list (21)
Return to previous screen (17)
Select the disc or show disc information (18)
Display current playback condition (18)
Select a group of contents to play (17)
[PT1050]
Enhancing the surround sound effect (33)
Turn the unit off automatically (Sleep timer)
≥The maximum setting is 120-min (in 30-min steps).
≥Press the button again to confirm the remaining time on
the unit’s display.
≥To cancel, select “OFF” in the main unit’s display.
Start up and play a disc automatically (17, 28)
Select preset radio stations/channels (29, 31)
Select the source
[DVD]:
DVD/CD
(11)
[TUNER/BAND]:
FM/AM
(
29
)
, XM
(30)
[
N
,
O
SELECT]:
DVD/CD, FM/AM, XM,
AUX
(34)
/ MUSIC P.
(34)
/
D-IN
(34)
(
[PT1050]
) / OPTION
(34)
Frame-by-frame/Select or register menu items on the
television screen (17)/Browse XM radio categories (31)
Select radio stations/channels manually (29, 31)
The below function is available only when using the
optional Panasonic wireless sound system SH-FX85.
[2ND SELECT]
:
Change the source for the second room
MAIN SOURCE (follows the selected source for the
main room)#(FM#AM)
§
#XM#OPTION#
Return to MAIN SOURCE
§
If the main room is in FM/AM mode, you can only
select the same mode for the FM/AM tuner of the
second room.
For details, refer to the operating instructions for the
optional Panasonic wireless sound system SH-FX85.
Mute the sound
≥“MUTING” flashes in the main unit’s display while
the function is on.
≥To cancel, press the button again or adjust the
volume.
≥Muting is canceled when you switch the unit to
standby.
Adjust the volume of the main unit
Turn the main unit on/off (11)
Television operations
Refer to “Operating the television” below.
Panasonic: 0051, 0250
Fisher: 0154
GE: 0047
Gold Star: 0178, 0317, 0457
Hitachi: 0145
JVC: 0053
Magnavox: 0054
Mitsubishi: 0150
Philips: 0054
Quasar: 0051, 0250
RCA: 0047
Samsung: 0060, 0587, 0702
Sanyo: 0154
Sharp: 0093, 0165
Sony: 0000
Sylvania: 0054
Thomson: 0047
Toshiba: 0156
Zenith: 0017
Avoiding interference with other Panasonic equipment
Control reference guide
PT950 and 1050_En.book Page 12 Thursday, December 21, 2006 1:48 PM