Filter
Top Products
RQTX0064
13
Control reference guide
Listening caution
POWER
5 DISC SELECTOR
SELECTOR
TUNING
TUNE MODE FM MODE
MEMORY
MUSIC PORT
VOLUME
SKIP
EXCHANGE
DISC
OPENCLOSE
12345
SETUP MIC
VOLUME
AUTO OPERATION ON/OFF
POWER
AUTO OPERATION
ON/OFF
POWER
Standby/on switch [POWER Í/I]
Turn the main unit on/off.
Press to switch the unit from on to standby mode or
vice versa. In standby mode, the unit is still
consuming a small amount of power. (16)
MUSIC PORT/SETUP MIC
Connect an external device (34)/
Connect the setup microphone (33)
4, 5/X TUNING W
Skip or slow-search play (16)/
Select the radio stations/channels (29, 31)
SELECTOR (29)
DVD/CD#FM#AM#XM#
AUX#MUSIC P.#D-IN ([PT1050])#
OPTION#Return to DVD/CD
∫/-TUNE MODE/—FM MODE
Stop playing (16)/
Select the tuning mode (29)
Adjust the FM reception condition (29)
1/MEMORY
Play discs (16)/Memorize the receiving
radio stations/channels (29, 31)
Display
< OPEN/CLOSE
Open/Close the disc drawer (16)
DISC EXCHANGE
Open the disc drawer to exchange
the disc in the play position (16)
DISC SKIP
Skip to the next disc tray (16)
Unit on/off button
[POWER C I, BÍ]
Use this button to turn
the unit on and off.
C I: This unit is on.
BÍ: This unit is off.
AUTO OPERATION ON/OFF indicator
The indicator lights red when the wireless system is turned on
and lights green when the wireless link is activated.
When the wireless link is inactive for a long time, it turns red.
Headphones (not included)
Headphone plug type: ‰3.5 mm (
1
/8z) stereo mini plug
≥Reduce the volume before connecting.
≥Audio is automatically switched to 2-channel stereo.
≥To prevent hearing damage, avoid listening for
prolonged periods of time.
Remote control signal sensor
Adjust the volume of
the main unit.
Unit on/off button
[POWER BÍ, C I]
Use this button to turn
the unit on and off.
BÍ: This unit is off.
C I: This unit is on.
AUTO OPERATION ON/OFF indicator
The indicator lights red when the wireless
system is turned on and lights green when
the wireless link is activated.
When the wireless link is inactive for a long
time, it turns red.
5 DISC SELECTOR
Select a disc directly (16)
≥A disc indicator lights if a disc is detected or a
tray is unchecked.
[PT1050]
EST. 1924
Selecting fine audio equipment such as the unit
you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider
how you can maximize the fun and excitement
your equipment offers. This manufacturer and
the Electronic Industries Association’s
Consumer Electronics Group want you to get
the most out of your equipment by playing it at a
safe level. One that lets the sound come
through loud and clear without annoying blaring
or distortion—and, most importantly, without
affecting your sensitive hearing.
We recommend that you avoid prolonged
exposure to excessive noise.
Sound can be deceiving. Over time your
hearing “comfort level” adapts to higher
volumes of sound. So what sounds “normal”
can actually be loud and harmful to your
hearing.
Guard against this by setting your equipment at
a safe level BEFORE your hearing adapts.
To establish a safe level:
≥Start your volume control at a low setting.
≥Slowly increase the sound until you can hear
it comfortably and clearly, and without
distortion.
Once you have established a comfortable
sound level:
≥Leave it there.
Taking a minute to do this now will help to
prevent hearing damage or loss in the future.
After all, we want you listening for a lifetime.
0064 En_p03-15.fm Page 13 Wednesday, January 31, 2007 12:27 PM