Panasonic SC-BTT560 SC-BTT500 SC-BTT460 SC-BTT400 Home Theater System User Manual


 
49
Reference
VQT4Q16
Cannot charge or operate.
¾ Check that the iPod/iPhone is connected
firmly. (> 28)
¾ [BTT560] [BTT500] When iPod/iPhone devices
are connected to both the USB port and the
Dock, disconnect both of them, and then
connect only the one you want to play back.
¾ The battery of the iPod/iPhone is depleted.
Charge the iPod/iPhone, and then operate
again.
¾ When unexpected operation occurs while
using the iPod/iPhone, connect the iPod/
iPhone again or try to restart the iPod/iPhone.
Distorted sound or noise is heard.
¾ Adjust the position of the antenna.
A beat sound is heard.
¾ Try to keep a certain amount of distance
between the antenna and the TV.
Noise is excessive.
¾ Change the audio to be output as monaural.
Press [AUDIO] to select “MONO”.
The sound becomes monaural.
To cancel, press the button again or change
the frequency.
In normal circumstances, select “AUTO STEREO”.
I can’t connect to the network.
¾ Confirm the network connection and settings.
(> 18, 20, 40)
¾ There may be obstacles that prevent the unit
from detecting your home network. Bring the
unit and the wireless router closer to each
other.
¾ Check the operating instructions for each
device and connect accordingly.
When using wireless LAN connection, video
from the DLNA Certified media server is not
played back or video frames are dropped
during playback.
¾ Higher transfer rate router such as 802.11n
(2.4 GHz) wireless router may solve the
problem. If you use 802.11n (2.4 GHz)
wireless router, it is necessary to set the
encryption type to “AES”.
Simultaneous use with a microwave, cordless
telephone etc. at 2.4 GHz may result in
connection interruptions or other problems.
¾ On the “Wireless Settings” screen (> 40), the
continuous lighting of at least 4 “Reception”
indicators is the target for a stable connection.
If 3 or fewer indicators are lit or the
connection is being interrupted, change the
position or angle of your wireless router and
see if the connection state improves. If there
is no improvement, connect to a wired
network and perform the “Easy Network
Setting” (> 20) again.
iPod/iPhone operation
Radio
Network
SC-BTT560&500&460&400EBEP-VQT4Q16_mst.book 49 ページ 2012年12月3日 月曜日 午前10時25分