Filter
Top Products
13
Getting started
VQT4Q16
STEP 2: Preparing the speakers
[BTT560] [BTT460] Front speakers
1 Attach the stand to the base.
2 Tighten the 3 screws (supplied) securely.
3 Slide the speaker cable into the groove.
4 Attach the speaker.
5 Tighten the screw (supplied) securely.
≥ After connecting the speaker cable (> 14),
press the cable into the groove.
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Assembling the speakers
Thread the speaker
cable through the
base.
Groove
SC-BTT560&500&460&400EBEP-VQT4Q16_mst.book 13 ページ ２０１２年１２月３日 月曜日 午前１０時２５分