39
Advanced operations
VQT4Q16
¾BD-Video Secondary Audio
Select whether or not to mix the primary and
secondary audio (including the button click
sound).
If “Off” is selected, the unit outputs the primary
audio only.
¾HDMI Audio Output
This setting selects whether or not to output
audio from HDMI.
≥ Audio will be output through the system’s
speakers when “Off” is selected.
∫ Digital Audio Input
Press [OK] to show the following settings:
¾PCM-Fix
Selects the audio output from the devices
connected to this unit.
≥ “On”: PCM is available.
≥ “Off”: DTS, PCM and Dolby Digital are
available.
Select “On” if the sound is cut off intermittently.
∫ TV Audio Input
Select the TV audio input to work with the VIERA
Link operations.
∫ Downmix
Select the downmix system of multi-channel to
2-channel sound.
≥ Select “Surround encoded” to enjoy the
surround sound.
≥ There is no downmix effect on the bitstream
audio signal.
≥ The audio will be output in “Stereo” in the
following cases:
– AVCHD playback
– Dolby TrueHD playback
– Playback of secondary audio (including the
button click sound).
∫ Audio Delay
Synchronization between picture and sound is
corrected by adjusting the delay time of the audio
output.
∫ Speaker
Refer to page 43.
∫ 3D BD-Video Playback
Select the playback method of 3D compatible
video software.
∫ 3D AVCHD Output
Select the output method of 3D AVCHD videos.
∫ 3D Type
Select the format of the connected TV.
≥ Change the settings for 3D on the TV also when
“Side by side” is selected.
∫ 3D Playback Message
Set to display or hide the 3D viewing warning
screen when playing back the 3D compatible
video software.
∫ Manual Settings (> 37)
∫ Graphic Display Level (> 37)
3D
SC-BTT560&500&460&400EBEP-VQT4Q16_mst.book 39 ページ 2012年12月3日 月曜日 午前10時25分