Panasonic SC-BTT560 SC-BTT500 SC-BTT460 SC-BTT400 Home Theater System User Manual


 
16
VQT4Q16
HDMI
Use the ARC compatible High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p signal, please use
HDMI cables 5.0 meters or less.
Audio will be output through the system’s speakers when “Off” is selected in “HDMI Audio Output”. (
>
39)
TV Audio
To output TV audio from this unit's speakers, you need to switch the selector. (> 22)
OPTICAL IN
After making the digital audio connection, make settings to suit the type of audio from your digital
equipment. (> 39)
*1
If the HDMI terminal on the TV is labelled “HDMI (ARC)”, the connection of the optical digital audio cable is not required.
*2
It is also possible to use an audio cable instead of the optical digital audio cable. In this case, connect the AUX terminal on
the main unit with the audio output terminal on the TV.
Use an FM outdoor antenna if radio reception is poor.
Connecting to a TV
What is ARC?
ARC is an abbreviation of Audio Return Channel, also known as HDMI ARC. This feature allows a home
theatre system to receive and play audio from the TV through a single HDMI cable without additional wiring.
OPTICAL
OUT
L
R
AUDIO OUT
AV IN
HDMI cable (not supplied)
Optical digital audio cable*
1
(not supplied)
Audio cable*
2
(not supplied)
FM antenna connection
75
Affix this end of the antenna to a wall or pillar where
the reception is best.
FM indoor antenna (supplied)
SC-BTT560&500&460&400EBEP-VQT4Q16_mst.book 16 ページ 2012年12月3日 月曜日 午前10時25分