Panasonic SC-BTT560 SC-BTT500 SC-BTT460 SC-BTT400 Home Theater System User Manual


 
28
VQT4Q16
Connect the iPod/iPhone to either of the USB port
or the Dock ([BT T5 60] and [BTT500] only).
[BTT560 ] [BTT500] Only underlined iPod/iPhone
on page 27 can be connected to the Dock.
Preparation
Turn the main unit off or reduce the volume of
the main unit to its minimum.
1 Connect the iPod/iPhone.
To purchase a dedicated USB cable, consult
your iPod/iPhone dealer.
1 Push the centre of drawer (A), and pull
out fully until it clicks to open the dock.
2 Connect the iPod/iPhone firmly.
Check that the connector (B) has no dust
or foreign materials before connecting.
To connect the iPod/iPhone firmly, remove it
from the case, etc. before inserting.
Insert the iPod/iPhone along the backrest
(C) with the iPod/iPhone display facing out.
Carefully insert and remove the iPod/iPhone
to ensure long lasting product enjoyment.
1 Press [HOME].
2 Select “iPod” and press [OK].
3 Select the item to play.
Repeat this procedure if necessary.
Album artwork
If album artwork is not contained in the
data, “ ” will appear on TV.
Depending on the software version of your
iPod/iPhone, the album artwork may not
appear properly.
Some operations may not work while
reading the album artwork.
The setting of the playback mode will be kept until changes
are made on the same iPod/iPhone.
Surround sound effect and sound mode are available.
iPod/iPhone Connection
Connecting with a dedicated
USB cable
[BTT560] [BTT500]
Connecting to the Dock
Dedicated USB cable
(not supplied)
iPod/iPhone (not supplied)
e.g.,
iPod/iPhone Playback
iPod/iPhone
(not supplied)
iPod
Ronaldo
-2:30
Good morning
45 of 1230
Happy days
1:00
SC-BTT560&500&460&400EBEP-VQT4Q16_mst.book 28 ページ 2012年12月3日 月曜日 午前10時25分