Filter
Top Products
48
VQT4Q16
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio type.
¾ Check connections to speakers and other
equipment. (> 13s19)
¾ Ensure the speaker settings for your
speakers are correct. (> 43)
¾ To output audio from a device connected with
an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu. (> 39)
¾ When “BD-Video Secondary Audio” is set to
“On”, Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio and DTS-HD High
Resolution Audio are output as Dolby Digital
or DTS Digital Surround.
¾ Re-master will not work when the bitstream
signal is output from the HDMI AV OUT
terminal. (> 36)
¾ Depending on the connected equipment, the
sound may be distorted if this unit is
connected with an HDMI cable.
¾ The multi-channel audio from a device
connected to the TV is not output in it’s
original multi-channel form.
jIf the device has an optical audio output
terminal, connect the device to this unit’s
DIGITAL AUDIO IN terminal. (> 17)
No surround sound.
¾ Press [SURROUND] to select a surround
effect. (> 44)
¾ [BTT560] [BTT500]
(When using the 7.1ch speaker system)
Audio is not available from the surround back
speakers (optional) even though Dolby Pro
Logic II turns on.
Cannot switch audio.
¾
When audio is output from the HDMI AV OUT
terminal, set “Dolby D/Dolby D +/Dolby TrueHD”,
“DTS/DTS-HD” or “MPEG Audio” to “PCM”. (
>
38)
No sound from the TV.
¾ Press [EXT-IN] to select the corresponding
source. (> 22)
¾ When connecting the unit to a TV using an
HDMI cable, check whether the HDMI
terminal on the TV is labelled “HDMI (ARC)”.
If not labelled in this way, connect using the
HDMI cable in combination with an optical
digital audio cable. (> 16)
¾ If there is no sound from the equipment
connected to this unit’s DIGITAL AUDIO IN
terminal, please make sure that the optical
audio output of the equipment is set to PCM.
Disc cannot be played.
¾ The disc is dirty. (> 6)
¾ The disc is not finalized. (> 8)
Still pictures (JPEG) do not play back
normally.
¾ The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can’t play back BD-Live.
¾ The SD card is write-protected. (> 8)
¾ Confirm that this unit is connected to the
broadband Internet. (> 18)
¾ Confirm the “BD-Live Internet Access”
settings. (> 41)
¾ Confirm an SD card is inserted into the SD
card slot. (> 22)
Alternative soundtrack and subtitles cannot
be selected.
¾ The languages are not recorded on the disc.
¾ You may not be able to use the Option menu
to change the soundtrack and subtitles on
some discs. Use the disc’s menus to make
changes. (> 26)
Sound
Playback
SC-BTT560&500&460&400EBEP-VQT4Q16_mst.book 48 ページ ２０１２年１２月３日 月曜日 午前１０時２５分