Filter
Top Products
8
RQT7972
Front speaker assembly
∫ Attaching to a wall
You can attach all of the speakers to a wall.
1 Drive a screw (not included) into the wall.
2 Fit the speaker securely onto the screw(s) with the hole(s).
≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg (22 lbs) per screw. Consult a qualified
building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers.
≥Use of optional speaker cables is recommended for wall-mounted front speakers. (You can also remove the speaker cables from the pipes
supplied with this system).
≥[HT930] [HT933] When mounting the front speakers to a wall, we recommend using a string (not included) to prevent it from falling (➜ page 7).
∫ Fitting speaker stands (not included)
(Except Front speakers)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance between screws as shown in the diagram.
≥The stands must be able to support over 10 kg (22 lbs).
≥The stands must be stable even if the speakers are in a high position.
Other speaker setup options
30–35 mm
(1
3
/16q–1
3
/8q)
‰7.5–9.4 mm
(
19
/64q–
3
/8q)
4.0–7.0 mm
(
5
/32q–
9
/32q)
Wall or pillar
‰3.0–4.0 mm
(
1
/8q–
5
/32q)