Filter
Top Products
12
RQT7972
Conserving power
The main unit consumes a small amount of power, even when it is turned off (For U.S.A. and Canada: approx. 0.5 W or for other areas: approx.
0.9 W). To save power when the unit is not to be used for a long time, unplug it from the household AC outlet.
You will need to reset some memory items after plugging in the unit.
[Note]
The included AC power supply cord is for use with this unit only. Do not use it with other equipment.
STEP5
Radio and system connections
TV
AUDIO
IN
VCR
AUDIO
IN
A
L
FM ANTFM ANT
AM ANTAM ANT
DIGITAL
TRANSMITTER
(7(75≠)
LOOPLOOP
EXTEXT
COMP
P
B
P
R
R
VOLT ADJ
127 V 110 V 220 V-230 V 240 V
1
2
Active subwoofer
Adhesive tape
System cable
To household
AC outlet
Catch up
To disconnect
Press the catch
and pull out.
[For\areas\except\U.S.A.\and\Canada]
≥If the power plug does not fit
your AC outlet
Use the power plug adaptor
(included).
If it still doesn’t fit, contact an
electrical parts distributor for
assistance.
[For[areas[except[U.S.A.[and[Canada[
Before connecting the AC
power supply cord
Set the voltage.
Use a flat-head screwdriver to turn the
voltage selector on the back of the
subwoofer to the appropriate position for
the area in which this system is used.
If the power supply in your area is 115 V or
120 V, please set the voltage selector as
follows:
≥For 115 V: Set to 110 V.
≥For 120 V: Set to 127 V.
AC power supply cord
Main unit
AM loop antenna
Stand the antenna up on its base.
Place the antenna where reception is best.
Keep loose antenna cable away from other
wires and cables.
Catch up
Click!
System cable AM loop antenna FM indoor antenna AC power supply cord
\U.S.A.\and\Canada] \Others]
Power plug adaptor
\Areas\except\U.S.A.\and\Canada]
FM indoor antenna
Affix this end of the antenna where
reception is best.
≥Connect the AC power supply cord after all other connections are complete.
≥Optional antenna connections (➜ page 29).
The illustration shows SC-HT730
for U.S.A. and Canada.
To disconnect
Press the catch
and pull out.
Set your surround sound free!
Panasonic SH-FX50 Digital Transmitter and Receiver (optional)
\For\U.S.A.\and\Canada] (Except SC-HT933)
When you insert the digital transmitter into the DIGITAL TRANSMITTER slot of the main unit and connect the surround speakers to the
receiver, you can enjoy surround speaker sound wirelessly.
For details, please refer to the operating instructions for Panasonic SH-FX50 Digital Transmitter and Receiver.
Radio and system connections
HT730.book Page 12 Wednesday, June 1, 2005 8:55 AM