Filter
Top Products
33
RQT7972
Specifications Operating other equipment
This remote control can also operate some other brands of
televisions and video cassette recorders. Change the code to
operate such equipment (➜ below).
Aim the remote control at the equipment.
While pressing [TV] or [VCR]
Press a numbered button to enter the first
digit, and then the second digit.
The remote control outputs the on/off signal. If the code is correct,
the equipment turns on or off. If it doesn’t, try entering another code.
[Note]
Reenter the codes after you change the batteries.
1 Press [DVD/CD] to select “DVD/CD”.
or
Press [TUNER/BAND] to select “FM” or
“AM”.
2 Start recording and play.
Press [AUX] to select “AUX” as the source.
Changing the remote control code
Operating the tape deck
([HT930] [HT933] only)
Recording to the tape deck
Listening to the tape deck
Television code list
Panasonic: 01, 02, 26
Sony: 04
Fisher: 14
G-E: 02, 03, 07, 09
Gold Star: 07, 15
Hitachi: 05, 07
JVC: 12
LXI: 03, 06, 07, 10, 14,
15
Magnavox: 06, 07, 11, 15, 22
Mitsubishi: 07, 15, 16, 21
NEC: 07, 15
Philco: 06, 07
Philips: 06
Pioneer: 02, 10, 19
Quasar: 02
RCA: 03, 07, 09, 13, 23,
24, 25
Sanyo: 14
Sharp: 08, 21
Sylvania: 06, 07, 15
Symphonic: 17
Toshiba: 10, 21
Zenith: 18, 20
Video cassette recorder code list
Panasonic: 01, 02, 09, 33
Sony: 05, 06, 07, 35, 36,
37
Fisher: 13, 14, 15, 18, 34
Funai: 08, 30
G-E: 02, 03, 11
Gold Star: 27
Hitachi: 09, 10, 11
JVC: 19, 25, 31, 38, 39,
40
LXI: 10, 13, 14, 15, 18,
27, 30
Magnavox: 02, 09, 12
Mitsubishi: 21, 22, 28, 29
NEC: 19, 25, 31, 38
Philco: 02, 09, 12, 30
Philips: 02, 09, 12
Pioneer: 09
Quasar: 01, 02, 09, 33
RCA: 02, 03, 04, 09, 10,
11, 12, 23, 24, 26
Sanyo: 14, 18, 34
Sharp: 16, 17
Shintom: 32
Sylvania: 02, 09, 12, 30
Symphonic: 30
Toshiba: 23, 24
Zenith: 20
Specifications
AMPLIFIER SECTION
[HT730]
RMS Output Power: Dolby Digital Mode
Front Ch 70 W per channel (4 ≠), 1 kHz, 10 % THD
Surround Ch 70 W per channel (4 ≠), 1 kHz, 10 % THD
Center Ch 260W per channel (4 ≠), 1 kHz, 10 % THD
Subwoofer Ch 260 W per channel (4 ≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power 800 W
FTC Output Power: Dolby Digital Mode
Front Ch 45 W per channel (4 ≠), 120 Hz–20 kHz, 1 % THD
Surround Ch
45 W per channel (4
≠
), 120Hz–20kHz, 1% THD
Center Ch
140 W per channel (4
≠
), 120Hz–20kHz, 1% THD
Subwoofer Ch 150 W per channel (4
≠
), 45 Hz–120 Hz,
1% THD
Total FTC Dolby Digital mode power 470 W
[HT733]
RMS Output Power: Dolby Digital Mode
Front Ch 65 W per channel (4 ≠), 1 kHz, 10 % THD
Surround Ch 60 W per channel (4 ≠), 1 kHz, 10 % THD
Center Ch 250W per channel (4 ≠), 1 kHz, 10 % THD
Subwoofer Ch 250 W per channel (4 ≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power 750 W
FTC Output Power: Dolby Digital Mode
Front Ch 40 W per channel (4 ≠), 120 Hz–20 kHz, 1 % THD
Surround Ch
40 W per channel (4
≠
), 120Hz–20kHz, 1% THD
Center Ch
130 W per channel (4
≠
), 120Hz–20kHz, 1% THD
Subwoofer Ch 140 W per channel (4
≠
), 45 Hz–120 Hz,
1% THD
Total FTC Dolby Digital mode power 430 W
[HT930] [HT933]
RMS Output Power: Dolby Digital Mode
Front Ch 170 W per channel (6 ≠), 1 kHz, 10 % THD
Surround Ch 70 W per channel (4 ≠), 1 kHz, 10 % THD
Center Ch 260 W per channel (4 ≠), 1 kHz, 10 % THD
Subwoofer Ch 260 W per channel (4 ≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power 1000 W
FTC Output Power: Dolby Digital Mode
Front Ch 100 W per channel (6 ≠), 120 Hz–20 kHz, 1 % THD
Surround Ch
45 W per channel (4 ≠), 120 Hz–20 kHz, 1 % THD
Center Ch 140 W per channel (4 ≠), 120 Hz–20 kHz, 1 % THD
Subwoofer Ch
150 W per channel (4 ≠), 45 Hz–120 Hz, 1 % THD
Total FTC Dolby Digital mode power 580 W
FM/AM TUNER, TERMINALS SECTION
Preset station FM 15 stations
AM/MW 15 stations
Frequency Modulation (FM)
Frequency range 87.9–107.9 MHz (200-kHz step)
87.5–108.0 MHz (100-kHz step)
Sensitivity 2.5 µV (IHF)
S/N 26 dB 2.2 µV
Antenna terminals 75 ≠ (unbalanced)
Amplitude Modulation (AM/MW)
Frequency range 520–1710 kHz (10-kHz step)
AM Sensitivity S/N 20 dB at 1000 kHz 560 µV/m
Phone jack
Terminal Stereo, 3.5 mm (
1
/
8
z
) jack