Filter
Top Products
37
CQ-SRX7000U
1
E
N
G
L
I
S
H
28
Notes:
¡Operations except setting should be performed after
returning to the mode display.
¡If no keys have been pressed for more than 15 sec-
onds, the display returns to the previous one after
changing to the menu display.
¡Press [DISP] to return to the regular mode.
Press [BAND] to switch the beep on or off in turn.
: Operation sound is heard when pressing buttons.
: No sound
OFF
ON
Press [BAND] to switch between mute or attenuator in turn.
: No sound
: Decrease to 1/10
ATT
MUTE
Press [BAND] to change the volume level of the sound source as shown.
Press [BAND] to activate the function or inactivate it in turn.
: External input (AUX-IN) is selectable as a source.
: External input (AUX-IN) is not selectable as a source.
With AUX-IN set to OFF, AUX-IN will not be selected when [SOURCE] is pressed.(a page 12 about source
selection)
OFF
ON
Press [BAND] to activate the function or inactivate
it in turn.
: Security function is active.
: Security function is inactive.
OFF
ON
Note: The setting state of the Navi Mute is displayed when the voice
guidance is used (except when the setting state is OFF).
: No sound
: Decrease to 1/30
: Decrease to 1/10
: Unchanged
OFF
Lv 2
Lv 1
Lv 0
When the key in the ignition is turned OFF.
¡Security message will be displayed.
¡The panel removal and SD Memory Card removal
alarm will be active.
When the front panel is removed.
¡The security indicator blinks. (a page 45)
Security Function
<Function Setting>
[DISP] (Return)
[}] [{]
(Select)
[BAND] (Set)
[SEL] (Menu)