Filter
Top Products
25
CQ-SRX7000U
1
E
N
G
L
I
S
H
16
Notes:
¡Operations except setting should be performed after
returning to the mode display.
¡If no keys have been pressed for more than 15 sec-
onds, the display returns to the previous one after
changing to the menu display.
¡Press [DISP] to return to the regular mode.
[P•SET}] / [}] : Heavy bass
[P•SET{] / [{] : Light bass
[TUNE[] / [[] : Sharp treble
[TUNE]] / []] : Soft treble
Press [BAND] to set.
• Recreation
• Enjoyable drive
• Calm down
• Concentration
• Safe drive
• Stress relieving
• Refresh
• Listen to the music
• Rhythmical
• Awakening
Heavy
Light
Sharp
Soft
Adjust the level for each frequency.
q Press [TUNE[] or [TUNE]] / [[] or []] to
move the cursor.
w [P•SET}] / [}] : Upper level.
[P•SET{] / [{] : Lower level
GEQ Adjustment
q Position the cursor on “P•SET” using [TUNE[]
or [TUNE]] / [[] or []].
w Press [P•SET}] or [P•SET{] / [}] or [{]
to select preset number 1 to 5.
e Adjust the level for each frequency.
Note: New setting is overwritten on existing saved set-
ting after following this procedure.
Memorize
After changing to the GEQ adjusting display,
q Position the cursor on “P•SET” using [TUNE[]
or [TUNE]] / [[] or []].
w Press [P•SET}] or [P•SET{] / [}] or [{]
to select one of the preset numbers 1 - 6
Note: Memorizing and callback can not be performed
by using [1] to [6] on the remote control.
Calling Back the Preset Tone Quality
[]] [[]
(Select)
[}] [{]
(Select/Adjust)
GEQ Adjusting Display
[BAND] (Set)
[SEL] (Menu)
<Audio Setting>
[DISP] (Return)