Filter
Top Products
15
CQ-SRX7000U
1
E
N
G
L
I
S
H
6
One-touch selection of a preset station
Up to 6 stations each can be saved in the FM1, FM2, FM3 and AM preset station memories.
Manual Preset
Memory
Manually save a station in
the preset memory.
Select a band and frequency (step q, w and e on the previous page)
q Press and hold [P•SET}] or [P•SET{] / [}] or [{] for more than
2 seconds until the preset number blinks.
w Press [P•SET}] or [P•SET{] / [}] or [{] to select a preset num-
ber.
e Press and hold [P•SET}] or [P•SET{] / [}] or [{] for more than
2 seconds to memorize.
The display blinks once, and a receiv-
ing station is saved in the memory.
Note: Frequency setting can be performed even after selecting a preset num-
ber.
Entering numbers directly from the remote control
Select a band and frequency (step q, w and e on the previous page)
Press and hold [1] to [6] on the remote control for more than 2 seconds.
Auto Preset
Memory
Automatically save strong
stations in the preset
memory.
Select a band (step q, w on the previous page)
Press and hold [BAND] for more than
2 seconds.
¡The 6 strongest available stations will be automatically saved in the memory
under preset numbers 1 to 6.
¡Once set, the preset stations are sequentially scanned for 5 seconds each.
¡To stop the scanning, press [P•SET}] or [P•SET{] / [}] or [{].
(Pressing [1] to [6] on the remote control also can stop the scanning.)
Preset Station
Calling
Select a band (step q, w on the previous page)
Press [P•SET}] or [P•SET{] / [}] or [{] to select the preset number
for tuning in the preset station.
Press [1] to [6] on the remote control.
Note: New stations are overwritten on existing saved stations after following this procedure.
Entering numbers directly from the remote control
Scanning