Filter
Top Products
En-41
Advanced Operations
On-screen Setup
This section describes the procedure for using the
remote controller unless otherwise specified.
With the AV receiver connected to a TV, there are two
ways of changing the settings on-screen: using the
Quick Setup or the Setup Menu (HOME).
■ Quick Setup
The Quick Setup provides quick access to frequently
used settings. You can change settings and view the
current information.
■ Setup menu (HOME)
The Setup menu (HOME) provides a convenient way
to change the AV receiver’s various settings. Settings
are organized into 11 categories.
Tip
• The on-screen menus appear only on a TV that is
connected to the HDMI OUT.
Note
• The on-screen menus are displayed when:
–There is no video input, or
–The video input is 480p, 576p, 720p, 1080i, or 1080p.
■ Input
`You can select input sources and view information
on their assignments.
Use / to select an input source and view its
assignment information.
Pressing ENTER switches to the selected input
source.
■ Audio (➔ page 42)
`You can change the following settings: “Bass”,
“Treble”, “PM Bass”, “Subwoofer Level”,
“Center Level”, “Audyssey”, “Dynamic EQ”,
“Dynamic Volume”, “Late Night”, “Music
Optimizer”, and “Cinema Filter”.
■ Information
*1
`You can view the information of the following
items: “Input” and “Output”.
■ Listening Mode
*2
`You can select the listening modes that are
grouped in the following categories: “MOVIE/TV”,
“MUSIC”, “GAME”.
Use / to select the category and / to
select the listening mode. Press ENTER to
switch to the selected listening mode.
Note
*1
Depending on the input source and listening mode, not
all channels shown here output the sound.
*2
• This setting is not available in either of the following
cases:
–The “Audio TV Out” setting is set to “On” (➔ page 53).
–“HDMI CEC (RIHD)” is set to “On” (➔ page 52) and
you’re listening through your TV speakers.
Explanatory Notes
Setting target
Setting options (default setting underlined)
Advanced Operations
Using the Quick Setup
1
Press RECEIVER followed by Q SETUP.
The Quick Setup will be superimposed on the TV
screen.
2
Use / and ENTER to make the desired
selection.
Press Q SETUP to close the menu.
Press RETURN to return to the previous menu.
Q SETUP
RECEIVER
ENTER,
/ / /
RETURN
Input
Audio
Information
Listening Mode
[ENTER:Select]
Quick Setup
■ PM Bass
`Off
`On