Filter
Top Products
Advanced Settings
43
Setting Item Default Value Setting Details
HDMI Through Off You can display the video of an HDMI
connected player on the TV even if the unit is
in standby mode. This setting is effective only
for an input selector to which an HDMI jack is
assigned in "HDMI Input". It cannot be set to
any other input selector unless an HDMI jack is
assigned to it.
"Off": The setting is disabled. Video of device
connected to any jack will not be displayed.
"BD/DVD", "CBL/SAT", "STB/DVR", "GAME",
"PC", "AUX", "TV/CD", "PHONO": Video of the
device connected to the HDMI IN jack assigned
to each input will be displayed on the TV.
"Last": Video of the device connected to the
HDMI IN jack assigned to the input selector that
was selected immediately before the unit enters
standby mode will be displayed on the TV.
"Auto": Video of all the devices connected to the
HDMI IN jacks will be output to the TV.
"Auto (Eco)": Video of all the devices connected
to the HDMI IN jacks will be output to the TV.
If you select this setting when using a CEC-
compatible TV, you can reduce the power
consumption in standby mode.
r
In the following cases, the "Auto" and "Eco"
cannot be selected:
– "HDMI CEC (RIHD)" is set to "Off".
– "HDMI CEC (RIHD)" is set to "On" and
also "Control Monitor" is set to "Zone2".
r
When "HDMI Through" is enabled, the power
consumption increases even when the unit
is on standby. However, the increase in
power consumption is kept to a minimum
by automatically entering the HYBRID
STANDBY mode, where only the essential
circuit is operating.
r
When changing the setting, turn off and
then on again the power of all connected
components.
Setting Item Default Value Setting Details
Audio TV Out (MAIN) Off You can enjoy audio through the speakers of
the HDMI connected TV while this unit is on.
"On": Use this function
"Off": Do not use this function
r
If you select "On", set "HDMI CEC (RIHD)"
to "Off."
r
The setting is fixed to "Auto" if "HDMI CEC
(RIHD)" is set to "On" and "Control Monitor"
is set to "MAIN".
r
Listening mode cannot be changed if "Audio
TV Out (MAIN)" is set to "On" and audio is
being output through the speakers of the TV.
r
Depending on your TV set or input signal
of the component, audio may not output
through the speakers of the TV even if this
setting is set to "On". In such case, audio is
output from the speakers of the unit.
r
If you operate the MASTER VOLUME
control of the unit when "Audio TV Out
(MAIN)" or "HDMI CEC (RIHD)" is set to
"On" and you are listening to the audio
through the speakers of your TV, audio will
be output from the unit. If you do not want to
output audio from the unit, change the unit
or TV settings, or reduce the volume of the
unit.
r
"Audio TV Out (MAIN)" is fixed to "Off" if
"Monitor Out" is set to "SUB".