Filter
Top Products
Advanced Settings
30
Setting Item Default Value Setting Details
Double Bass ----- Boost bass output by feeding bass sounds from
the front left and right, and center speakers to the
subwoofer.
"On": Bass output will be boosted.
"Off(THX)": Bass output will not be boosted.
r
The setting will not automatically be configured
even if you performed the automatic speaker
setup.
r
If "Subwoofer" is set to "No" or if "Front" is set to
other than "Full Band", the setting will be fixed to
"-----".
r
If you're using THX-certified speakers, we recommend the following settings:
– Set a value "80Hz(THX)" in Crossover frequency.
– Set a value "80Hz(THX)" in LPF of LFE.
– Set a value "Off(THX)" in Double Bass.
Speaker Distance
Set the distance from each speaker to the listening position. Settings are automatically
configured if you use the automatic speaker setup.
Setting Item Default Value Setting Details
Unit feet/meters Specify the unit of distance for configuring settings.
"feet": When setting in feet (0.1 ft to 30.0 ft, in
increments of 0.1 ft)
"meters": When setting in meters (0.03 m to 9.00 m,
in increments of 0.03 m)
Front Left 12.0 ft/3.60 m Specify the distance between each speaker and the
listening position.
Wide Left 12.0 ft/3.60 m Specify the distance between each speaker and the
listening position.
Center 12.0 ft/3.60 m Specify the distance between each speaker and the
listening position.
Wide Right 12.0 ft/3.60 m Specify the distance between each speaker and the
listening position.
Front Right 12.0 ft/3.60 m Specify the distance between each speaker and the
listening position.
Surround Right 7.0 ft/2.10 m Specify the distance between each speaker and the
listening position.
Setting Item Default Value Setting Details
Back Right 7.0 ft/2.10 m Specify the distance between each speaker and the
listening position.
r
The setting cannot be changed if "Speaker
Configuration" - "Back" is set to "None".
r
The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back Channel" is set to "1ch".
r
In the following cases, the setting cannot be
changed:
– "Powered Zone 3" is set to "Yes", and ZONE2 and
ZONE3 are set to on.
– "Front Speakers Type" is set to "Normal“ or "Passive
Subwoofer" is set to "Yes", "Powered Zone 2" is set
to "Yes" and ZONE2 is set to on.
Back Left 7.0 ft/2.10 m Specify the distance between each speaker and the
listening position.
r
The setting cannot be changed if "Speaker
Configuration" - "Back" is set to "None".
r
The setting is not displayed if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back Channel" is set to "1ch".
r
In the following cases, the setting cannot be
changed:
– "Powered Zone 3" is set to "Yes", and ZONE2 and
ZONE3 are set to on.
– "Front Speakers Type" is set to "Normal“ or "Passive
Subwoofer" is set to "Yes", "Powered Zone 2" is set
to "Yes" and ZONE2 is set to on.
Back 7.0 ft/2.10 m Specify the distance between each speaker and the
listening position.
r
The setting is not displayed only if "Speaker
Configuration" - "Back" is set to other than
"None" and also "Back Channel" is set to "1ch".
r
In the following cases, the setting cannot be
changed:
– "Powered Zone 3" is set to "Yes", and ZONE2 and
ZONE3 are set to on.
– "Front Speakers Type" is set to "Normal“ or "Passive
Subwoofer" is set to "Yes", "Powered Zone 2" is set
to "Yes" and ZONE2 is set to on.
Surround Left 7.0 ft/2.10 m Specify the distance between each speaker and the
listening position.