Filter
Top Products
Advanced Settings
40
5.Listening Mode Preset
You can preset your favorite listening mode to each input. (For example, you can always
apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play it in unchanged
sound field.)
Select the input, signal type and listening mode.
Although it is possible to select the listening mode during playback, the selected mode will
be reset when the unit enters standby mode.
Setting Item Default Value Setting Details
Analog/PCM Last Valid Set the listening mode for playing PCM signals
of CD and analog signals of record and cassette
tape.
Mono/
Multiplex Source
Last Valid Set the listening mode for playing Dolby Digital,
AAC and other digital signals recorded in
monaural or multiplex audio.
2ch Source Last Valid Set the listening mode for playing Dolby Digital
and other digital signals recorded in 2 channels.
Dolby D/
Dolby D Plus/
TrueHD
Last Valid Set the listening mode for playing Dolby Digital,
Dolby Digital Plus and Dolby TrueHD signals.
DTS/DTS-ES/
DTS-HD
Last Valid Set the listening mode for playing digital audio
signals in DTS and DTS-HD High Resolution
formats. Select the listening mode specified for
Blu-ray or such other DTS-HD Master Audio
source.
Other Multich Source Last Valid Set the listening mode for playing DSD signals
of AAC, DVD-Audio and Super Audio CD that
are input from HDMI IN jack.
r
Available listening modes vary depending on the input signal.
r
Setting "Last Valid" will always select the last selected mode.
r
Only "Analog" can be set to the "TUNER" input.
r
"Digital" and "TrueHD" can be set to the "NET" and "USB" inputs.
r
Only "Digital" can be set to the "BLUETOOTH" input.
6.Miscellaneous
Volume Setup
Make the detailed volume setting of the unit.
Setting Item Default Value Setting Details
Volume Display Absolute Switch the volume display between the
absolute value and relative value. The absolute
value 82 is equivalent to the relative value 0 dB.
"Absolute": Absolute value such as "1" to "99"
"Relative (THX)": Relative value such as
"-81dB" and "+18dB"
r
If the absolute value is set to 82, "82Ref"
will appear on the display and the "THX"
indicator will flash.
Muting Level Set the volume lowered from the listening
volume when muting is on.
(in 10 dB increments)
Maximum Volume Off Set the maximum value to avoid too high
volume. Select a value from "Off", "50" to "99".
Power On Volume Last Set the volume level of when the power is
turned on. Select a value from "Last" (Volume
level before entering standby mode), "Min", "1"
to "99" and "Max".
r
You cannot set a higher value than that of
"Maximum Volume".
Headphone Level 0 dB Adjust the volume level difference between
speakers and headphones. Select a value
between "-12 dB" to "+12 dB".