Onkyo TX-NR1030 Stereo Receiver User Manual


  Open as PDF
of 102
 
Advanced Settings
35
Dolby
Make the settings for Dolby listening mode.
Setting Item Default Value Setting Details
Loudness
Management
On Enable the Late Night function that allows you to enjoy
surround sound of Dolby TrueHD playback even in low
volume.
"On": Use this function
"Off": Do not use this function
Center Spread Off Adjust the width of the front sound field created during
Dolby Surround listening mode playback.
"On": The sound field is spread to left and right.
"Off": The sound field is centralized.
r
The setting cannot be changed if "Center" is set to
"None" in "Speaker Configuration".
DTS
Make the settings for DTS Neo:X Music listening mode.
Setting Item Default Value Setting Details
Neo:X Music
Center Image
2 Adjust the width of the sound field of the front
channel when playing in the DTS Neo:X Music
listening mode.
"0" to "5": Selecting a smaller value brings the
sound field of the front channel to the center while
selecting a larger value spreads the sound field of
the front channel to left and right.
Theater-Dimensional
Make the settings for Theater-Dimensional mode.
Setting Item Default Value Setting Details
Listening Angle Wide Set the angle of the front left and right speakers
relative to the listening position when playing in
the Theater-Dimensional listening mode.
"Narrow": Less than 30°
"Wide": Greater than 30°
r
Values recommended for "Listening Angle" are: 20° when "Narrow" is selected and 40° when "Wide"
is selected.
LFE Level
Set the low-frequency effect (LFE) level of the Dolby Digital, DTS, Multichannel PCM, Dolby
TrueHD, DTS-HD Master Audio and DSD signals.
Setting Item Default Value Setting Details
Dolby Digital/Dolby
Digital Plus
0 dB Select the low-frequency effect (LFE) level of

low-frequency effect sound is too strong, select

r
This setting works on LFE channel volume of
Dolby Digital and Dolby Digital Plus sources.
DTS/DTS-HD
Highresolution Audio
0 dB Select the low-frequency effect (LFE) level of

low-frequency effect sound is too strong, select

r
This setting works on LFE channel volume of
DTS and DTS-HD High Resolution sources.
Multich PCM 0 dB Select the low-frequency effect (LFE) level of

low-frequency effect sound is too strong, select

Dolby TrueHD 0 dB Select the low-frequency effect (LFE) level of

low-frequency effect sound is too strong, select

DTS-HD Master
Audio
0 dB Select the low-frequency effect (LFE) level of

low-frequency effect sound is too strong, select

DSD 0 dB Select the low-frequency effect (LFE) level of

low-frequency effect sound is too strong, select

r
This setting works on LFE channel volume of
DSD (Super Audio CD) sources.
 previous next