Filter
Top Products
Advanced Settings
41
OSD Setup
Make the setting of on-screen display function that can display the setting menu screen,
volume operation screen and the like on the TV.
Setting Item Default Value Setting Details
On Screen Display On Set whether or not to display the On Screen
Display (OSD) on the TV.
"On": The operation screen will be displayed on
the TV.
"Off": The operation screen will not be displayed
on the TV.
r
The operation screen may not be displayed
depending on the input signal even if "On"
is selected. If the operation screen is not
displayed, change the resolution of the
connected device.
Language English Select the OSD language.
Screen Saver 3min Set the time to start the OSD screen saver.
Select a value from "3min", "5min", "10min" and
"Off".
7.Hardware Setup
Multi Zone
Setting Item Default Value Setting Details
Zone 2 Out Fixed Select which of the integrated amplifier in a
separate room or this unit should be used to
adjust the volume when Zone 2 is active.
"Fixed": Adjust on the Integrated amplifier in a
separate room
"Variable": Adjust on the unit
Zone 2 Maximum
Volume
Off Set the maximum value for Zone 2 to avoid too
high volume. Select a value from "Off", "50" to
"99".
Zone 2 Power On
Volume
Last Set the Zone 2 volume level of when the unit is
turned on. Select a value from "Last" (Volume
level when the unit was turned off), "Min", "1" to
"99" and "Max".
r
You cannot set a higher value than that of
"Zone 2 Maximum Volume".
Setting Item Default Value Setting Details
Zone 3 Out Fixed Select which of the integrated amplifier in a
separate room or this unit should be used to
adjust the volume when Zone 3 is active.
"Fixed": Adjust on the Integrated amplifier in a
separate room
"Variable": Adjust on the unit
Zone 3 Maximum
Volume
Off Set the maximum value for Zone 3 to avoid too
high volume. Select a value from "Off", "50" to
"99".
Zone 3 Power On
Volume
Last Set the Zone 3 volume level of when the unit is
turned on. Select a value from "Last" (Volume
level when the unit was turned off), "Min", "1" to
"99" and "Max".
r
You cannot set a higher value than that of
"Zone 3 Maximum Volume".
Tuner
Setting Item Default Value Setting Details
AM/FM Frequency
Step (North
American model)
10kHz/200kHz Select a frequency step depending on your
area of residence.
Select "10kHz/200kHz" or "9kHz/50kHz".
r
When this setting is changed, all radio
presets are deleted.
AM Frequency Step
(European model)
9kHz Select a frequency step depending on your
area of residence.
Select "10kHz" or "9kHz".
r
When this setting is changed, all radio
presets are deleted.