Filter
Top Products
Advanced Settings
42
HDMI
Setting Item Default Value Setting Details
HDMI CEC (RIHD) Off Setting to "ON" enables the input selection link
and other link functions with HDMI connected
CEC compliant device.
"On": Use this function
"Off": Do not use this function
r
Depending on the TV set, a link may need to
be configured on the TV.
r
This function is effective only when the
device is connected to the HDMI OUT MAIN
terminal.
r
Setting to "On" and closing the on-screen
menu displays the name of the CEC-
compatible components and "RIHD On" on
the display.
r
Power consumption in standby mode may
increase if "On" is set. (Depending on the TV
status, the unit will enter the normal standby
mode.)
r
If you operate the MASTER VOLUME
control of the unit when this setting is set
to "On" and you are listening to the audio
through the speakers of your TV, audio will
be output also from the speakers connected
to the unit. If you want to output from only
either of them, change the unit or TV
settings, or reduce the volume of the unit.
r
If abnormal operation occurs when you set
the setting to "On", set it to "Off".
r
When connecting a non-CEC compatible
component, or when you are not sure
whether it is compatible, set the setting to
"Off".
r
When changing this setting, turn off and
then on again the power of all connected
components.
Setting Item Default Value Setting Details
Control Monitor MAIN Select the main room monitor or the separate
room monitor for which the CEC link function is
enabled when Zone function is used.
"MAIN": The CEC link function is enabled for
the monitor in the main room.
"ZONE2": The CEC link function is enabled for
the monitor in Zone 2.
r
"MAIN" cannot be selected when " Monitor
Out " is set to "SUB".
r
"ZONE2" can be selected only when
r
When "ZONE2" is selected in "Control
Monitor", the power consumption increases
even when the unit is on standby. However,
the increase in power consumption is kept
to a minimum by automatically entering the
HYBRID STANDBY mode, where only the
essential circuit is operating.