Filter
Top Products
57
Audio Adjust
These settings are enabled depending on the listening mode or input
signal.
Setup Procedure
1. Press the AUDIO ADJUST button.
The Audio Adjust settings appear in the front display and on the
monitor.
Note:
The items that appear in the menu depend on the currently selected
listening mode or the input signal. (see page 59).
2. Use the and cursor buttons to select the item that
you want to set.
3. Use the and cursor buttons to set the value.
Setting Values Initial value
Bass –12 to +12 0
Treble –12 to +12 0
Subwoofer (Analog/PCM) On, Off On
Late Night Off, Low, High Off
Center Image 0, 1, 2, 3, 4, 5 3
Panorama On, Off Off
Dimension 0, 1, 2, 3, 4, 5, 6 3
Center Width 0, 1, 2, 3, 4, 5, 6, 7 3
Front Effect* Low, Middle, High Middle
Surround Effect* Low, Middle, High Middle
* TX-SR700/700E only
Bass, Treble
Separately adjust the bass and treble settings in 2-decibel
increments.
The Bass and Treble adjustments are only enabled for the front left
and right speakers.
Note:
If Direct or Pure Audio is selected as the listening mode, these
settings cannot be made. To make these settings, first select another
listening mode.
Subwoofer
When “Yes” is selected for the “Subwoofer” setting in the “Speaker
Config” menu, set this to “Off” if you do not want to have sound
output from the subwoofer when listening to Analog/PCM sources.
If “No” is selected for the “Subwoofer” setting in the “Speaker
Config” menu, this setting will not appear.
Late Night
The audio for movies made for the cinema have a large dynamic
range; thus, the difference between loud noises and soft noises is
great. To hear the quieter sounds such as background noises or
human conversations, the movie must be played back at larger
volumes. When this setting is set to “High” or “Low,” the dynamic
range of the sound is narrowed down to allow you to easily hear
minute sounds at low volumes. This function is especially useful if
you wish to play a movie at low volumes during the nighttime.
This can be set to either “Off” or “Low,” or “High.” When this
setting is set to “High” or “Low,” the dynamic range of the sound is
narrowed down to allow you to easily hear minute sounds at low
volume.
Off: Select to turn off the Late Night function.
Low: Select to narrow down the dynamic range.
High: Select to further narrow down the dynamic range.
Notes:
• The Late Night function is effective only on Dolby Digital
encoded software.
• The depth of the Late Night effect is determined by Dolby
Digital software. With some sources, it may produce little or no
effect.
AUDIO ADJUST
///
AUDIO ADJUST
///
Bass : 0dB
Treble : 0dB