Filter
Top Products
36
Configuring the speakers
To create the optimum sound space for both visual and audio
pleasure, it is necessary to set the size of the speakers and their
distance from your normal listening position. Once made, you will
not need to change these settings unless you change the speaker
configuration or positions. Once you have connected the speakers,
complete the following settings using the OSD Setup menu* before
using the speakers.
*OSD Setup Menu
The OSD (On Screen Display) Setup Menu is displayed on the TV or
projector monitor connected to the TX-SR700/700E/600/600E. It is
used to configure the various settings of the TX-SR700/700E/600/
600E for optimum performance.
Displaying the Main Menu
1. Display the main menu.
Press the MENU button on the front panel or SETUP button on
the remote controller to display the main menu (Menu) on the
monitor and front display.
When the menu is not displayed on the monitor (TX-
SR600/600E only)
The default OSD Output setting is “Video” (see page 56). When the
monitor is connected to the S Video jack, change the “OSD Output”
setting to “S Video.”
1. Press the MENU button on the front panel or SETUP
button on the remote controller.
2. Use the and cursor buttons to select “5. OSD
Setup” and then press the ENTER button.
3. Use the and cursor buttons to select “OSD
Output” and then use the
and cursor buttons to
select “S Video.”
4. Press the MENU button.
Speaker Configuration
1. Display the main menu.
2. Use the and cursor buttons to select “1. Speaker
Config.”
3. Press the ENTER button.
The speaker configuration menu appears.
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
|ENTER|Quit:|SETUP|
Remote
controller
TX-SR700/700E/
600/600E
MENU RETURN
ENTER
///
RETURN SETUP
ENTER
///
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
|ENTER|Quit:|SETUP|
* Menu *****************
1.Speaker Config
2.Speaker Distance
3.Level Calibration
4.Input Setup
5.OSD Setup
6.Preference
1.Speaker Config
***********************
a.Subwoofer :Yes
b.Front :Large
c.Center :Large
d.Surround :Large
e.Surround Back:Large
f.Crossover : 80Hz
Quit:|SETUP|
Remote controllerTX-SR700/700E/600/600E
Remote controllerTX-SR700/700E/600/600E