Filter
Top Products
21
Connections (TX-SR700/700E)
9. Connecting video camera, etc. (VIDEO 4 INPUT)
Using an RCA video cable, connect the video output jack
(composite) of the device to the VIDEO 4 VIDEO jack of the TX-
SR700/700E. Or if the device has an S video output jack, connect it
to the VIDEO 4 S VIDEO jack of the TX-SR700/700E using an S
video cable.
Using an RCA audio cable, connect the audio output jack of the
device to the VIDEO 4 AUDIO jacks of the TX-SR700/700E. Make
sure that you properly connect the left channel to the L jack and the
right channel to the R jack.
If the device has an optical digital output, connect it to the VIDEO 4
DIGITAL jack of the TX-SR700/700E.
The VIDEO 4 digital input is fixed to the OPTICAL input on the
front panel.
12V TRIGGER ZONE 2 terminal
When the TX-SR700/700E is in the ZONE 2 mode, this terminal
outputs at 12 V/100 mA.
Video output
Analog output
Right (red)
Left (white)
Digital output
(optical)
9. Video camera/Video game
(VIDEO 4 INPUT)
S Video output
L
27122974
REMOTE
CONTROL
CAUTION: SPEAKER IMPEDANCE
6 OHMS MIN. /SPEAKER
ANTENNA
FM
75
AM
COAXIAL
OPTICAL
1
2
IN
IN
IN
IN
FRONT
SURR
CENTER
SUB
WOOFER
VIDEO 2
VIDEO 1
OUT
OUT
DIGITAL INPUT
VIDEO 2
DVD
MONITOR
OUT
DVD
TAPE
CD
SUBWOOFER
PRE OUT
L
R
FRONT
SPEAKERS
ZONE
2
SPEAKERS
SURROUND
SPEAKERS
CENTER
SPEAKER
R
L
R
L
FRONT
SURROUND
CENTER
ZONE 2
SURROUND
BACK
R
L
R
L
PRE OUT
R
VIDEO 3
VIDEO 1
V
12
V
TRIGGER
OUT
ZONE 2
VIDEO 3
OPTICAL
COAXIAL
DIGITAL
INPUT
IN
IN
IN
OUT
IN
DIGITAL
OUTPUT
IN
INPUT 1INPUT 2
OUTPUT
COMPONENT VIDEO
L
R
PHONO IN
P
R
P
B
Y
GND
OUT
OUT
S
IR
IN
SURROUND
BACK
SPEAKER
AC OUTLETS
SWITCHED
TOTAL 100W MAX.
AC 230-240
V
50
Hz
AV RECEIVER
MODEL NO.
TX
-
SR700E
L
CD
SUBWOOFER
PRE OUT
R
FRONT
SURROUND
CENTER
ZONE 2
SURROUND
BACK
R
L
R
L
PRE OUT
SURROU
BACK
SPEAKE
Front
Surround
Surround back
Center
Subwoofer
R (red)
L (white)
R (red)
L (white)
7654321
PRE OUT
These jacks are for connecting an auxiliary power amplifier.
You can use an auxiliary power amplifiers to listen at louder
volumes than you can with the TX-SR700/700E alone. When using a
power amplifier, connect each speaker to the power amplifier.
1. Subwoofer
2. Front right speaker
3. Front left speaker
4. Surround right speaker
5. Surround left speaker
6. Surround back speaker
7. Center speaker
Power amplifier