Filter
Top Products
32
Synchro-recording from or CD
recorder to MD
When your MD-101A is configured into a
system with Onkyo Separate Collection series
components (R-801A and CDR-201A),
synchronized recording from the MD recorder is
possible.
1 Press the INPUT button
repeatedly until “Analog In”
appears.
• You cannot perform synchro recording
with the “Digital In 1” or “Digital In 2”
input sources.
2 Select a recording mode.
Refer to Step 4 on page 22.
3 Set the MD recorder to the
recording standby mode.
• For information on setting the MD
recorder to recording standby mode
and the necessary preparatory steps,
see “Analog recording” on page 24.
4 Start playing the CD recorder.
Press the play button on the CDR-201A
after the time indicator lights up on the
recorder’s display. “Synchro Rec” appears
and the recorder starts recording.
To adjust the recording level, refer to Step
7 on page 25.
The MD recorder starts recording signals
from the CD recorder.
If the recording level is not appropriate,
refer to Step 7 on page 25 to adjust the
level.
System operation (continued)
To stop synchro recording
Press the button on the CD recorder. The MD
recorder then enters recording standby mode.
REC
MINIDISC
RECORDER
DISC LOADIING MECHANISM
DISPLAY
MD
-
101
A
STANDBY
/
ON
STANDBY
CD
DUBBING
PUSH TO
ENTER
MULTI JOG
EDIT
/
NO YES
REC
REC MODEINPUT
INPUT REC
INPUT
(CDR-201A)