Filter
Top Products
25
Before Using
Connections
Other Information
Operations
Recording (continued)
6 Press the REC button.
The MD recorder is now in recording
standby mode.
.
7 Using the MULTI JOG knob,
adjust the recording level.
Adjust the recording level.
7-1 Press the EDIT/NO button, then turn
the MULTI JOG knob until “Rec Level?”
appears.
Then, press the MULTI JOG knob.
When the recording level adjustment
is completed, stop playing the source.
7-2 Turn the MULTI JOG knob to adjust
the recording level.
Adjust the recording level such that the -4
to -2 dB indicator lights when the input
signal is largest. (Also refer to the current
recording level readout displayed in dB.)
Tip:
You can adjust the recording level in 5dB
steps for the range between –60.0 dB and
–30.0 dB, in 2.5 dB steps for the range
between –30.0 dB and –12.5 dB, and in
0.5dB steps for the range between –12.5dB
and +18.0 dB.
Then, press the MULTI JOG knob.
REC
EDIT
/
NO
ANALOG IN
MULTI JOG
R
L
MULTI JOG
MULTI JOG
010 2 OVER40
R
6
L
MULTI JOG
MINIDISC
RECORDER
DISC LOADIING MECHANISM
DISPLAY
MD
-
101
A
STANDBY
/
ON
STANDBY
CD
DUBBING
PUSH TO
ENTER
MULTI JOG
EDIT
/
NO YES
REC
REC MODEINPUT
REC MODE REC
EDIT/NO
,
MULTI JOG
Adjust the level so the
OVER indicator will
not light up.
Adjust the level in the range between –4
and –2 for the maximum signal level.
(Continued on the next page)