Onkyo HT-R980 Stereo Receiver User Manual


 
37
En
Explanatory Notes
Main Menu Input/Output Assign
Monitor Out
You can specify the output resolution for the HDMI OUT
and COMPONENT VIDEO MONITOR OUT and have
the AV receiver upconvert the picture resolution as neces-
sary to match the resolution supported by your TV.
Resolution
`Through
:
Select this to pass video through the AV receiver at
the same resolution and with no conversion.
`Auto:
Select this to have the AV receiver automatically
convert video at resolutions not supported by your
TV.
`480p (480p/576p):
Select this for 480p or 576p output and video con-
version as necessary.
`720p:
Select this for 720p output and video conversion as
necessary.
`1080i:
Select this for 1080i output and video conversion as
necessary.
`1080p:
Select this for 1080p output and video conversion as
necessary.
HDMI Input
If you connect a video component to an HDMI input, you
must assign that input to an input selector. For example, if
you connect your Blu-ray Disc/DVD player to HDMI
IN 2, you must assign “HDMI2” to the “BD/DVD” input
selector.
If you’ve connected your TV to the AV receiver with an
HDMI cable, composite video and component video
sources can be upconverted
*
to HDMI. See “Video Con-
nection Formats” for more information on video signal
flow and upconversion (18).
Here are the default assignments.
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX,
TV/CD, PORT
`HDMI1, HDMI2, HDMI3, HDMI4:
Select a corresponding HDMI input that the video
component has been connected.
`-----:
Select this to output composite video and component
video sources from the HDMI OUT. The video sig-
nal from HDMI output is configured in “Component
Video Input” (38).
• Each HDMI input cannot be assigned to two input selec-
tors or more. When HDMI1 - HDMI4 have already
been assigned, you must set first any unused input selec-
tors to “-----” or you will be unable to assign HDMI1
- HDMI4 to input selector.
Note
When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the “Digital
Audio Input” (38). In this case, if you want to use the coaxial
or optical audio input, make the selection in the Audio Selector
in the Audio menu (22).
TUNER selector cannot be assigned and is fixed at the “-----
option.
If you connect a component (such as UP-A1 Dock that seated
iPod) to UNIVERSAL PORT jack, you cannot assign any input
to PORT selector.
Do not assign the component connected with the HDMI input to
TV/CD selector when you set “TV Control” setting to “On
(50). Otherwise, appropriate CEC (Consumer Electronics
Control) operation will not be guaranteed.
Input/Output Assign
Subwoofer
Ye s
:
No:
Main Menu Speaker Setup
Menu selection
Setting target
Setting options (defau lt setting underlined)
Select if a subwoofer is connected.
Select if no subwoofer is connected.
Input selector Default assignment
BD/DVD HDMI1
VCR/DVR HDMI2
CBL/SAT HDMI3
GAME HDMI4
AUX -----
TUNER ----- (Fixed)
TV/CD -----
PORT -----
IN
OUT
Composite video,
component video
Composite video,
component video
HDMI
HDMI