Filter
Top Products
33
Troubleshooting
Trouble Cause Remedy
See
page
The disc skips sounds.
Track numbers cannot be stored
when setting MEMORY playback.
The disc is loaded in the disc tray,
but playback will not begin.
Search time (when moving to a
specific track) is extremely long.
• Vibrations are being transmitted to the unit.
• The disc is severely scratched.
• The disc is extremely dirty.
• There is no disc inserted in the unit.
• A track number not on the disc is being in-
put.
• The disc is inserted with the wrong side fac-
ing upward.
• The disc is extremely dirty.
• Moisture has formed inside the unit.
• The disc is dirty.
• The disc is scratched.
• Place the unit in a vibration free location.
• Replace the disc with a new one.
• Clean the disc.
• Insert a disc into the unit.
• Input only the track numbers on the disc.
• Insert the disc with the label side facing up-
ward.
• Clean the disc.
• Take the disc out and leave the unit for sev-
eral hours until the moisture evaporates.
• Clean the disc.
• Replace the disc with a new one.
–
21
21
18
20
18
21
3
21
21
Excessive electrical interference may temporarily render this system's sensitive microcomputer inoperable. If this happens, unplug the system
for at least five seconds.