Filter
Top Products
10
Making antenna connections
Assembling the AM loop antenna
Assemble the loop antenna as shown in the illustration.
Connecting the antenna cable
1. Press down the lever.
2. Insert the wire into the hole.
3. Release the lever to replace it.
Insert into the hole.
12 3
Connecting the included antennas
Connecting the FM indoor antenna
The FM indoor antenna is for indoor use only. Extend the antenna
and move it in various directions until the clearest signal is received.
Fix it with push pins or similar implements in the position that will
cause the least amount of distortion.
If the reception is not very clear with the attached FM indoor an-
tenna, the use of an outdoor antenna is recommended.
U.S. and Canadian models
Remove the insulation at the tip of the cable, and insert the cable
securely, fully to the end of the exposed tip.
Connecting the AM loop antenna
The AM loop antenna is for indoor use only. Set it in the direction
and position where you receive the clearest sound. Put it as far away
as possible from the unit, TVs, speaker cables, and power cords.
When reception is not satisfactory with the attached AM loop an-
tenna alone, connection of an outdoor antenna is recommended.
U.S. and Canadian models
Asian and
European models
ANTENNA
AM
FM
75
ANTENNA
AM
FM
75