Filter
Top Products
6
Front & Rear Panels
For detailed information, refer to the pages in parentheses.
A
POWER switch (14)
This is the main power switch. When set to OFF, the
A-9355/A-9155 is completely shutdown. When set
to ON, the A-9355/A-9155 can be set to On or
Standby.
B
STANDBY indicator (14)
This indicator lights up when the A-9355/A-9155 is
in Standby mode (Only the remote controller can be
used to set the A-9355/A-9155 to Standby).
C
PHONES jack (15)
This phone jack is for connecting a standard pair of
stereo headphones for private listening.
D
SPEAKERS A/B buttons and indicators (14)
These buttons are used to select which speaker set,
A or B, outputs sound. The indicators show if each
speaker set is on or off.
E
BASS control (16)
This control is for adjusting the level of bass
sounds.
F
TREBLE control (16)
This control is for adjusting the level of treble
sounds.
G
MUTING indicator (15)
The indicator lights up while muting function is
activated.
H
Volume control (15)
This control is used to adjust the volume of the
A-9355/A-9155.
I
(A-9355) PURE DIRECT button and indicator
(16)
This button turns the PURE DIRECT function on
and off. The indicator lights up when the PURE
DIRECT function is on.
(A-9155) DIRECT button and indicator (16)
This button turns the DIRECT function on and off.
The indicator lights up when the DIRECT function
is on.
J
LOUDNESS button and indicator (16)
This button is for reinforcing both treble and bass
when the volume is turned down low. Pressing the
button turns the LOUDNESS function on and off.
The indicator lights up when the LOUDNESS func-
tion is on.
K
Input selector and indicators (15)
This control is used to select the input sources.
These indicators show the currently selected input
source.
L Remote control sensor (5)
This sensor receives control signals from the remote
controller.
Front Panel
1234 5678 9JK L
This illustration is for A-9355.