Filter
Top Products
12
Connecting the A-9355/A-9155—Continued
Connecting a Tuner
Use an analog audio cable to connect the
A-9355/A-9155’s TUNER L/R jacks to the analog
audio output jacks on the tuner, as shown.
Connecting a Cassette Deck
Use an analog audio cable to connect the
A-9355/A-9155’s TAPE IN L/R jacks to the cassette
deck’s analog audio output jacks, and use another ana-
log audio cable to connect the A-9355/A-9155’s TAPE
OUT L/R jacks to the cassette deck’s analog audio input
jacks, as shown.
Connecting an MD Recorder
Use an analog audio cable to connect the
A-9355/A-9155’s MD IN L/R jacks to the MD
recorder’s analog audio output jacks, and use another
analog audio cable to connect the A-9355/A-9155’s MD
OUT L/R jacks to the MD recorder’s analog audio input
jacks, as shown.
Connecting a Remote Interactive Dock
(RI Dock)
Use an analog audio cable to connect the A-9355’s
DOCK Jack or A-9155’s LINE/DOCK IN jack to the RI
Dock’s analog audio output jacks, and use an cable
to connect the A-9355/A-9155’s jack to the RI
Dock’s jack, as shown.
* See page 13 to connect multiple audio components using
jacks.
Note:
If you use the Onkyo Remote Interactive Dock (DS-
A1), flip the RI MODE switch to “HDD” which is
located on the underside.
Connecting a TV or Other Component with
an Audio Output
Use an analog audio cable to connect the A-9355’s
LINE/MD IN jack or A-9155’s LINE/DOCK IN jack to
the analog audio output jacks on the TV or other com-
ponent, as shown.
Note:
If your TV has no audio output, you can connect the
A-9355/A-9155 to an audio output on your VCR and
use its tuner.
OUT
(IN)
REC
(OUT)
PLAY
/
(IN)
REC
(OUT)
PLAY
R
AUDIO OUT
----
L
*
Remote Interactive
Dock
AUDIO OUT