Filter
Top Products
25
4. The basic principles
The five menu buttons of the PROFI CAR are the key to all the adjustments you can
make. The symbols tell you the menu points to which each button provides access.
Menu button Menu function
A
TRIGGER
Everything to do with throttle and brake
NORM, CENTRE, TRAVEL and EXPO for the THROTTLE/BRAKE servo
L
STEERING
Adjust steering to suit the track / vehicle / driver
NORM, CENTRE, TRAVEL and EXPO for the STEERING servo
U
TIMER
Switch stopwatch ON or OFF, set signal time
Check and erase operating hours timer
T
TOOL
Basic transmitter settings
Set servo 3 mode
F
MEMORY
Change, assign name, erase
Once you have found your way to the appropriate menu point, you use the digi-
adjustor and the handle button to complete the process.
DIGI-ADJUSTOR
Set values (travels, times, ...)
HANDLE BUTTON Confirm erasure and memory change
(hold pressed in for longer than 3 sec.)
Return to the operating screen; press any menu button other than the one you last
used.
When you see the operating screen (i.e. when you have completed your
adjustments), the functions of the handle button and the digi-adjustor are as follows:
HANDLE BUTTON
Operate stopwatch (if active)
DIGI-ADJUSTOR
Adjust steering travel