Filter
Top Products
33
8. Stopwatch and operating hours timer ºº
The PROFI CAR 301 provides the following timing facilities:
v Stopwatch (TIMER)
Start and stop the stopwatch using the handle button
G
, provided that the
function has already been switched on in the TIMER menu.
v Stopwatch SIGNAL
Audible signal which can be used to signal the end of a practice run, for
example (max. 20 min.).
v Operating hours timer (OPTIME)
This timer records the period of use of the transmitter battery, and it always
runs when the transmitter is switched on. You can erase the operating time
in the „º“OPTIME menu.
8.1. Activating the stopwatch (timer)
This is the procedure:
§ Search for the menu point TIMER with the º button
§ Select ON or OFF with the digi-adjustor
Press any menu button (except º) to return to the operating
screen.
The stopwatch is operated by the handle button
G
(START/STOP).
Resetting the stopwatch to 0:
The stopwatch is reset to 00.0 by holding the handle button
G
pressed in for longer
than 3 sec. You can only do this when the operating screen is displayed.
8.2. Stopwatch signal (race duration)
The stopwatch’s signal function is useful for practice purposes: you set the signal
time to the planned race duration (max. 20 min.). Once you start the stopwatch (by
pressing the handle button) you will hear the following signals:
X short tone every full minute,
every 10 sec. during the last minute
every second during the last 10 sec.
X X long tone when the set time is elapsed
This is the procedure for setting the signal time:
§ Search for the menu point SIGNAL with the
º
button
§ Rotate the digi-adjustor to adjust the flashing number
§ Press the handle button
G
to move the cursor to the
next character
Press any menu button (except
º
) to return to the operating screen.
TIMER
OFF
SIGNAL
19:59:9
min : sec : 1/10