Filter
Top Products
29
6.2. Setting minimum steering travel
You can adjust the steering travel during a race using the digi-adjustor, ensuring that
the response is optimum for the track and your car at all times.
Note: this only works when the operating screen is visible!
The vertical bar on the far right of the screen shows how much steering
travel you actually have available at any one time. In our example 2/3 of
the possible range between minimum and maximum is available.
It is important that you are able to set a minimum travel beyond which
the digi-adjustor cannot reduce the steering; this can be set within the
range 30% and 100%.
LL press until
MINMIN--TRTR
appears
Search for menu
point
MIN-TR
60
%
Set minimum travel Range: 30% to 100%
Default: 44%
' TIP !
The maximum steering travel must be defined by adjusting the mechanical set-up
for the steering servo (è6.1).
6.3. EXPO
EXPO alters the steering characteristics of your model. If you set positive values (e.g.-
50%), the steering travel will be reduced around centre, making your car easier to
steer in a straight line at high speed.
Negative EXPO values produce the opposite effect, making the steering response
more direct around centre.
LL press until
EXPOEXPO
appears
Search for menu
point
EXPO
70
%
Set Expo
Range: -100% to 100%
Increment: 5%
Default: 0%