Filter
Top Products
37
§ Use the „T“ button to search for the menu point “AM-FM”.
§ Use the digi-adjustor to select the correct modulation to match the receiver
in that model.
Press any menu button (except T ) to return to the operating screen.
11.2. Entering the owner’s name (menu „T“, NAMENAME)
To identify your transmitter you can enter a 6-character name which appears briefly
on the screen when you switch the unit on. The following characters are available:
ABCDEFGHIJKLMNOPQRSTUVWXYZ-0123456789
§ Use the „T“ button to search for the menu point „NAME“.
§ The first character flashes, and can be changed using the digi-adjustor.
§ Use the handle button
G
to shift to the next character, and from the last
character back to the first one.
Press any menu button (except T) to return to the operating screen.
11.3. Selecting the screen language (menu „T“ , TEXTTEXT)
You can select any of five languages for the screen displays:
German, English, French, Italian, Spanish
§ Use the T button to search for the menu point „TEXT“.
§ Select the language using the digi-adjustor.
Press any menu button (except T) to return to the operating screen.
11.4. Setting the battery alarm threshold (menu „T“ , ALARMALARM)
The battery alarm threshold can be adjusted within the range 6.80 V to 7.20 V in 0.05
V increments. The default setting for the alarm threshold is 7.00 V.
The higher the threshold you set, the more reserve energy is left between the alarm
being triggered, and the battery being finally exhausted.
This is the procedure:
§ Use the T button to search for
the menu point „ALARM“.
§ Use the digi-adjustor to alter the alarm threshold in 0.05
V increments between 6.80 V and 7.20 V.
Press any menu button (except T) to return to the operating screen.
ALARM
6.80V
BATT