Filter
Top Products
30
6.4. Setting the steering trim increment (menu „TT“)
The trim rocker for steering can easily be found “blind”
because its shape and ribbed surface are different from those
of the other rockers.
The steering trim can be used to adjust the centre position of
the steering servo by 28% in either direction. Each increment
offsets the centre by at least 1% (FINE) and at most 4%
(COARSE). You can select the size of the trim increment in the
TRIM menu point of the „T“ menu; the default setting is
MEDIUM (2%).
' NOTE: the setting which you choose here also applies to the
idle and brake trims, and the steering travel adjustment (digi-
adjustor).
A vertical bar on the screen shows the current trim position.
T , T , ... until
TRIMTRIM
appears
Search for menu
point
TRIM
MEDIUM
Select trim increment COARSE 4 %
MEDIUM 2 %
FINE 1 %
7. The THROTTLE/BRAKE servo AA
The PROFI car offers the following functions for throttle/brake:
v Throttle and brake with separate EXPO
v Idle trim
v Lock point trim
For the sake of clarity:
The diagram on the right shows the servo
positions which are assigned to the individual
points on the throttle-brake curve.
Full throttle is influenced solely by the travel you
set for the throttle/brake servo.
You can also adjust the idle setting while the car
is running by operating the trim rocker (see above). The basic setting is defined using
the CENTRE adjustment point for the throttle/brake servo.
The lock point can also be changed when the car is running. The basic setting is
defined by adjusting the travel of the throttle/brake servo.
LL