Filter
Top Products
31
7.1. Throttle and brake with EXPO
You can apply EXPOnential to set the response of
the throttle/brake function to suit your personal
preference.
The diagram on the right shows the relationship
between the trigger movement and the servo
travel in graphic form.
If you set EXPO to 0%, the effect of the throttle/-
brake curve is linear. The dotted lines show how
EXPO can alter the two curves.
If you set EXPO to a negative value, the trigger will be more sensitive around the idle
position. Positive EXPO values produce an aggressive effect.
This is the procedure:
A , A , ...
EXPOEXPO
THRTHR
Search for menu
point for EXPO
THRottle
EXPO
THR 35
%
or:
A , A , ...
EXPOEXPO
BRKBRK
Search for menu
point for EXPO BRaKe
EXPO
BRK 27
%
then:
Set value Range: -100% to 100%
Default: 0%
Increment: 5%
7.2. Signal norm, direction of rotation and travels
for the throttle/brake servo
First set the signal norm and direction of rotation of the servo.
A , A , ...
SS--NORMNORM
Search for menu
point for servo norm
S-NORM
2: MR
Select norm and
direction using the
digi-adjustor
UN UNIVERSAL normal
UR UNIVERSAL reverse
MN MULTIPLEX normal
MR MULTIPLEX reverse