Filter
Top Products
5. On the right-hand side of your window you will see the following: “MIDI FILES
[HANDSET]”, and below that you will see three sets of numbers. For example:
321
421
214
These numbers are the three “MIDI FILES” that are currently on your phone.
You can only change these three MIDI files. The Bluetooth phone comes with
five MIDI files. However you CANNOT change tone number one, and tone
number two on your Bluetooth phone.
6. Click on “MIDI” from the menu.
7. Click on “Add MIDI files”; an “Open” dialogue box will appear. Now go to the
directory where you unzipped the MIDI file(s) to. The default directory for files
downloaded off the Bluetooth page is “c:\bluetooth_tones”
8. Highlight the MIDI file(s) you wish to import and click “OPEN”
9. Your MIDI files should now appear in the “MIDI FILES (SYSTEM)” section of
PhoneAPP.
10.Highlight one of the MIDI files that you downloaded, listed under “MIDI FILES
(SYSTEM)”.
11.Go across to “MIDI FILES (HANDSET)” and highlight any one of the three files
that you wish to replace.
12.Click “MOVE”.
13.The file you downloaded is now transferred to the “MIDI FILES (HANDSET)”
and is now on your Bluetooth phone, but in order to keep these settings you
must save the changes you have made by clicking the “Save All” button.
14.You can now close the application and unplug your phone from the USB cable.
33
USING THE SOFTWARE (CONTINUED)
MCD4300BT.2002.O/M.QXD 4/19/02 9:57 AM Page 33