Filter
Top Products
15
BASIC OPERATION (CONTINUED)
RECEIVING A CALL
The last 30 incoming calls are saved in the Caller ID log.
Make sure that the Caller ID service is
turned on by your phone company.
When you receive a call, the display
will show the name of the caller,
number, time and date of the call.
JOHN SMITH
8001234567
12/14
17
10:25
AM
1
To answer the call, press the TALK
button. The display will show the
amount of time you have been on
the phone.
2
NOTES:
• If a call is received from an area which does not provide caller ID service, the
display will show, “UNKNOWN”. If a call is received from outside the Caller ID
area, the display will show, “OUT OF AREA”.
• If a call is received from a caller that has blocked his/her information, the
display will show, “PRIVATE CALL”.
• When you receive a call, the unit will automatically set the time and date.
• The Caller ID memory can store up to 30 name/numbers.
• Calls picked up on the first ring will not be logged in the Caller ID log.
• Call Waiting calls are shown in the Caller ID log if you subscribe to the extra
feature from the phone company that allows this.
• If several calls are received from the same number, all calls are recorded
separately.
• If there are new calls, the display will show, “# NEW CALLS” and “# TOTAL
NEW CALLS”. If there are no new calls, it will just show “# TOTAL CALLS”.
IMPORTANT:
• If the Caller ID stops operating properly, reset the telephone by simply
unplugging it from the power source for five seconds, then plug it back in.
MCD4300BT.2002.O/M.QXD 4/19/02 9:57 AM Page 15