Filter
Top Products
4
ENGLISH
FRONT PANEL
q Power ON/STANDBY switch
This is used to turn the unit’s power ON and STANDBY.
When it is pressed, the display lights and the power is
turned on; when it is pressed again, the power is turned
off and STANDBY indicator will be illuminated.
w STANDBY indicator
This indicator illuminates red when the unit’s status is
standby.
e Remote control sensor
This sensor receives the infrared light transmitted from
the wireless remote control unit.
For remote control, point the wireless remote control unit
to the sensor.
Some of the functions can be operated with the remote
control unit (RC7001ST).
r CATEGORY button
This button to ENTER/EXIT XM Category search mode.
Available only when the unit is in the XM Satelite Radio
mode.
t DISPLAY button
This button is used to switch XM information such as
artist name/song title, category or signal status.
Available only when the unit in the XM Satelite Radio mode.
y Display
u MENU button
This button to ENTER/EXIT menu mode.
The unit times out if no operation is performed for about
5 seconds after the menu mode is set.
i A–PRESET button
This button is used for the auto preset memory feature
which automatically searches for and sets radio stations.
o SLEEP indicator
This indicator illuminates while the sleep timer is
running. The display is automatically dimmed while the
sleep timer is running.
!0 BAND SELECT button
This button is used to select XM, FM or AM.
!1 TIMER indicator
This indicator illuminates while the timer program is ON.
Timer Program
When a recording device with an auto start recording
function is connected (power on) to the AC outlet on the
rear panel of this tuner, timer recording is can be
controlled by the tuner’s timer.
Note
• For setting procedures for recording device, see the
instruction manual that came with the recording
device.
• If the internal clock has not been set, set the time first
before using the timer program. (
☞
page 19)
!2 TUNED indicator
This indicator illuminates when a station is properly
tuned in.
!3 STEREO indicator
This indicator illuminates when an FM station is being
tuned into stereo condition.
!4 TUNING/PRESET knob
This knob is used in conjunction with the MENU button,
and is used to select and determine the operation mode.
Also, this knob is used for the TUNING/PRESET search.
In the tuning mode, the reception frequency is tuned up or
down. Turning the control in the clockwise direction tunes
the frequency up. Tuning the control in the counterclockwise
direction tunes the reception frequency down.
In the preset mode, the selection of the preset channel is
moved up or down. The auto tuning operation cannot be
used when in this mode.
When entering station names, use this control to select
the letters (
☞
page 13).
Memo
• Whenever the Power ON/STANDBY switch is in the
STANDBY position, the unit is still connected on AC
line voltage.
Please be sure to unplug the cord when you leave
home for, say, a vacation.
•
Noise may be generated if a near-by television set is on
during AM, FM or XM broadcasting reception. The tuner
should be used as far away from a television as possible.
• Effective period of memory back-up is about a month
under normal temperature.
PART NAMES AND FUNCTIONS
PUSH ENTERPUSH ENTER
TUNING/PRESET
STEREOTUNEDTUNEDTIMERSLEEP
BAND SELECT
A—PRESET
MENUMENU
DISPLAY
CATEGORYCATEGORY
STANDBYSTANDBY
ON/STANDBYON/STANDBY
POWERPOWER
FM/AM TUNER ST7001
q r t u i !0 !2 !4
!3ye
o !1
w
For details on the functions of these parts, refer to the pages given in parenthesis.