Filter
Top Products
8
ENGLISH
CONNECTING THE ANTENNA TERMINALS
CONNECTIONS
ANTENNAANTENNA
FM(75FM(75
Ω
) GNDGND AM
XM
21
L
R
ANALOG OUT
OUT
IN
EXTERNALEXTERNAL
INTERNAL
R
L
RS-232C
MODELMODEL NO. NO. ST7001
FLASHER
IN
REMOTE
CONTROL
AC INAC IN
7
AM loop antenna assembly
7
Connection of AM antennas
7
Connecting the antenna wire to
the antenna adaptor
Loosen the screws and attach the wire terminals, then
tighten the screws with a screwdriver.
Direction of
broadcasting
station
75 Ω/ohms
COAXIAL
cable
FM outdoor antenna
FM indoor antenna (Supplied)
AM loop antenna
(Supplied)
q
r
we
Remove the vinyl tie
and take out the
connection line.
Connect to the AM
antenna terminals.
Bend in the
reverse
direction.
a. With the antenna on top
any stable surface.
b. With the antenna attached
to the wall.
Mount
Installation hole Mount on the wall, etc.
1. Push the lever. 2. Insert the
conductor.
3. Return the lever.
Ground
AM outdoor antenna
Use tape or a pin to fasten the tip of
the antenna to the wall, a rack, etc.
Notes
Connecting an FM outdoor antenna
• Keep the antenna away from noise sources (neon signs,
busy roads, etc.).
• Do not put the antenna close to power lines. Keep it well
away from power lines, transformers, etc.
• To avoid the risk of lightning and electrical shock,
grounding is necessary.
Connecting an AM outdoor antenna
An outdoor antenna will be more effective if it is stretched
horizontally above a window or outside.
• Do not remove the AM loop antenna.
• To avoid the risk of lightning and electrical shock,
grounding is necessary.