Linksys WML11B Speaker System User Manual


 
13
Chapter 4: Setting up the Wireless-B Media Link for Music
Running the Setup Wizard
Wireless-B Media Link for Music
7. On the Basic Settings screen, enter a unique name for the Media Link in the Device Name field.
If you network has a router or other DHCP server, select Automatic for the Network Setting, and click Next.
If the Media Link requires a static IP address, select Static IP for the Network Setting. Enter a unique IP
Address that is in the range of IP addresses appropriate for your network. In the Subnet Mask, Default
Gateway, and DNS Server fields, enter the Subnet Mask, Default Gateway address, and DNS Server address of
your network; all devices on your network must use the same Subnet Mask, Default Gateway, and DNS
Server. You must specify an IP Address, Subnet Mask, Default Gateway, and DNS Server for the Media Link on
this screen if it will use a static IP address. Then click Next.
8. If you will connect the Media Link to your PC or router using an Ethernet network cable AFTER configuration,
then go to step 10.
If you will connect the Media Link to your PC or router wirelessly AFTER configuration, then the Basic Wireless
Settings screen will appear.
The Mode setting shows a choice of two wireless modes. Select Infrastructure if you want the Media Link to
communicate using an access point or wireless router. Select Ad-Hoc if you want the Media Link to
communicate directly with a wireless PC.
In the SSID field, enter your wireless network’s SSID or name. This is the unique name shared by all devices in
a wireless network. The SSID is case-sensitive and should have 32 characters or fewer.
If your network uses WEP encryption, select Enable. If not, select Disable, and go to step 10.
Click Next.
Figure 4-6: Basic Settings Screen
Figure 4-7: Basic Wireless Settings Screen
Static IP address: a fixed address assigned to
a computer or device connected to a network.
NOTE: If you set a static IP address on the Media Link, then you may also need to set a static IP
address on your PC. For instructions, refer to Windows Help.
SSID: your wireless network’s name.
Ad-hoc: a group of wireless devices
communicating directly to each other (peer-to-
peer) without the use of an access point.
Infrastructure: configuration in which a
wireless network is bridged to a wired network
via an access point.