Filter
Top Products
5
Recommendations foR Best PeRfoRmance
•Maintain a clear line of sight between the transmitter and receiver antennas. Typically the
receiver antennas should be above head level. Avoid placing the receiver in the bottom of the
rack unless remote antennas are employed.
•Avoid placing the receiver behind walls. When this is necessary the receiver’s antennas should
be remotely located as to be in sight of the transmitter.
•Avoid placing the receiver in close proximity to RF generating equipment including computers,
wireless access points and microwave ovens.
•Point the antennas up and 45 degrees from vertical while avoiding touching metal objects like
rack or rack rails.
•Avoid blocking antennas in the transmitters. Do not “cup” the bottom of the handheld
transmitter. Avoid placing the beltpack transmitter in pockets.
suPPlied comPonents
XD-V75 Receiver (RX212): receiver; 9V / 0.5A external universal power supply; short rack ear; long
rack ear with D-holes for front-mounting antennas; two (2) BNC-to-BNC connectors; two (2) BNC-
to-BNC cables; two (2) half-wave articulating antennas (RDrac); dovetail “key” to join two receivers
for rack-mounting; square mounting bracket to “lock” the rear panels together; user’s manual.
THH12 Handheld Transmitter: transmitter; two (2) AA alkaline batteries; mic stand clip; fitted case.
or
TBP12 Beltpack Transmitter: transmitter; two (2) AA alkaline batteries; fitted case; optional lavalier
mic with windscreen and clip, headset mic with windscreen, instrument mic with windscreen and clip,
or instrument cable with quarter-inch connector.
Note, A full line of accessories is available to support the application of the XD-V75 digital wireless
microphone systems including: remote antenna, cables, cases, an antenna distribution system and
individual transmitter, receiver and microphone components. Please visit www.line6.com for more
information.