Lexicon MC-12 Stereo System User Manual


 
Configuring the MC-12 for V4 EQ
2-25
Version 4 EQ User Guide
ROOM EQ
AUTO SPEAKER SETUP
TEST WILL BEGIN IN
10
PRESS V TO SKIP
COUNTDOWN
MAIN MENU
MODE ADJUST
AUDIO CONTROLS
SETUP
SPEAKER SETUP
SET CROSSOVERS
CHECK MICROPHONES
AUTOMATIC
MANUAL
SET CROSSOVERS
BEFORE CALIBRATING
SETUP
INPUTS
SPEAKERS
REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS
SETUP
AUTOMATIC
SPEAKERS
10
AUTO SPEAKER SETUP
EQ DISTANCES LEVELS
ROOM EQ
DISTANCES
OUTPUT LEVELS
PLACE MICROPHONES
AROUND PREFERRED
LISTENING POSITIONS
AUTO SPEAKER SETUP
!CAUTION!
HIGH AUDIO LEVELS
YOU WILL HAVE 10 SEC
TO LEAVE THE ROOM OR
SIT QUIETLY
PRESS V TO BEGIN
COUNTDOWN
ROOM EQ
SETTING ROOM EQ
FRONT LEFT ---
CENTER ---
FRONT RIGHT ---
SIDE RIGHT ---
REAR RIGHT ---
REAR LEFT ---
SIDE LEFT ---
SUB (MONO) ---
SUB RIGHT N/A
LFE N/A
ROOM EQ DONE
PRESS V TO CONTINUE
ROOM EQ APPLIED
TO ADJUST
GO TO
AUDIO CONTROLS
SETTING ROOM EQ
FRONT LEFT SET
CENTER SET
FRONT RIGHT SET
SIDE RIGHT SET
REAR RIGHT SET
REAR LEFT SET
SIDE LEFT SET
SUB (MONO) SET
SUB RIGHT N/A
LFE N/A
AUDIO CONTROLS
ON
OFF
MAX
HIGH
MEDIUM
LOW
L< <|> >R
B< <|> >F -6.0 to +6.0-3.0 to +3.0
AUDIO CONTROLS
BASS +0.0dB
TREBLE +0.0dB
TILT EQ +0.0dB
LOUDNESS OFF
BALANCE <|>
FADER <|>
ZONE2 BALANCE <|>
RECORD BALANCE <|>
ROOM EQ ON
ROOM EQ LEVEL MEDIUM
Once the EQ DISTANCES LEVELS or ROOM EQ procedure has been performed:
The ROOM EQ parameter is automatically set to ON.
The ROOM EQ LEVEL parameter is automatically set to MEDIUM.
These settings can be adjusted on the AUDIO CONTROLS menu shown below.