Filter
Top Products
Configuring the MC-12 for V4 EQ
2-22
Lexicon MC-12 Controller
REMOTE CONTROL COMMANDS
The table below lists remote control commands that can be used
to adjust the ROOM EQ and ROOM EQ LEVEL parameters when
the Zone 2 Command Bank is activated. These commands are
additions to the remote control command matrix in the MC-12
User Guide.
Button Zone 2 Command
Sets the ROOM EQ LEVEL parameter to LOW.
Sets the ROOM EQ LEVEL parameter to MEDIUM.
Sets the ROOM EQ LEVEL parameter to HIGH.
Sets the ROOM EQ LEVEL parameter to MAX.
Sets the ROOM EQ parameter to ON.
Sets the ROOM EQ parameter to OFF.
MUSIC