Filter
Top Products
35
DC-2 Digital Controller
PCM Effects and Parameters
3
Panorama
PCM Effects and
Parameters
Parameter Initial Value Range
INPUT BALANCE (Centered) Full Left-Full Right
CENTER LEVEL 4 0-15
REAR ROLLOFF 4.9kHz 453Hz-20.0kHz
REAR DELAY 10ms 0-32ms
SURROUND LEVEL 12 0-32
BASS CONTENT MONO STEREO, MONO, BINAURAL
LOW FREQ WIDTH 0 -25 to +25
SUBWOOFER LVL +00dB OFF, -30dB to +05dB
EFFECT LEVEL 62 0-62
CUSTOM
Parameter Initial Value Range
CENTER LEVEL 9 0-15
SPEECH DETECT OFF ON/OFF
HALL SIZE 4 Meters 4-17 Meters
LIVENESS 4 0-6
ROLLOFF 9.7kHz 453Hz-20.0kHz
SUBWOOFER LVL +00dB OFF, -30dB to +05dB
EFFECT LEVEL +02dB -30 to +05dB
CUSTOM
Nightclub
The Nightclub Effect generates the appropriate early reflections for simula-
tion of many different intimate spaces, and sends the reflections to the front,
side and rear speakers.
The PCM Effects are compatible with two-channel input signals (analog or
digital). These effects are included in all three versions of the DC-2.
Panorama extracts the natural ambience from recorded music and moves it
outward from the speakers, producing greater width and depth of image
and a feeling of enhanced spaciousness. This mode adds no additional
sound but expands the existing stereo image. Panorama also works well
with Dolby Stereo movies, bringing the surround track outward into the
room.
The location of the front speakers and the listening position are crucial to
Panorama’s effectiveness and for best results your system and the DC-2
together should be set up and calibrated according to the procedure in
Chapter 2. The strength of the Panorama effect drops off as you move away
from the prime listening position, especially to the sides. Video systems
with the L/R main speakers spaced closely on either side of a TV screen will
produce a usable effect over a somewhat wider area than set-ups with a
large angle between the L/R main speakers.