Filter
Top Products
Lexicon
22
System
Configuration
Zone 2 volume on to the value selected in the OUTPUT LEVELS menu and
engages full mute in the main zone.
OFF
Turns off the Zone 2 outputs, and the associated front panel LEDs.
OSD (ON)
Displays a STATUS menu for the current input. Press Done to exit.
VOL ▲ and ▼
Displays, then adjusts the current Zone 2 volume level. Activated displays
(FP or OSD) will show level and a bar guage. When Zone 2 mute is engaged,
these controls adjust volume without disengaging Zone 2 mute.
Mute
Engages Zone 2 mute and reduces the Zone 2 volume level to -80db.
Pressing again restores volume to its previous level.
SELECT and DONE (remote control only)
Displays, then adjusts Zone 2 left/right balance. Activated displays (FP or
OSD) will show bar guage.
VCR, DVD, V Disc, TV, AUX, CD, Tuner, and Tape
Selects the Record/Zone 2 input and lights the corresponding front panel
input LED (unless the input is blocked). From Standby, the input is selected
with full mute engaged in the main zone.
Dolby, THX, Logic 7, and DTS
These controls sets the Zone 2 volume level to the following levels.
Dolby -30dB
THX -20dB
Logic 7 -10dB
DTS +00dB
2 CH, Party, TV M, andMusic
These controls sets the master volume level to the following levels. When
Zone 2 mute is engaged, these controls set the Zone 2 volume level without
disengaging mute.
2CH -30dB
Party -20dB
TV M -10dB
Music +00dB