KRAMER: SIMPLE CREATIVE TECHNOLOGY
SummitView™ System Cables
34
Cable Name Description Function SV-551
ALC
Essentials Kit
C-D9M/D9F-3 RS-232 cable 3ft
(0.91m)
Connect the SV-551 to a display
device
1 1
AD-D9F/D9F RS-232 Gender
Changer
9-Pin D (F/F) gender changer
1 -
BCP-2S-25 Speaker cables Connect the SV-551 to the
speakers
- 1
C-UA/MUB-3 USB-A to Mini USB-B
cable 3ft (0.91m)
Used to configure the SV-551 or
the RC-63DL
1 1
CP-S5E45/S5E45-
50
1
50ft (15.4m) CAT-5
cable, Plenum. Both
sides with RJ-45
connectors
Connect the US wall plates to the
SV-551
- 3 (2 for the
SV-301,
1 for the SV-301)
C-S5E45/S5E45-50
2
50ft (15.4m) CAT-5
cable. Both sides with
RJ-45 connectors
Connect US wall plates to the SV-
551
- 3 (2 for the
SV-301,
1 for the SV-301)
C-S5E45-50
3
50ft (15.4m) CAT-5
cable. One side with
RJ-45 connector, one
side unterminated
Connect EU wall plates to the SV-
551
- 3 (2 for SV-301,
1 for SV-301)
BCP-KNET-50
4
50ft (15.4m), Plenum,
balanced stereo
audio/control cable
Connect RC unit to the SV-551
1 1
BC-KNET-50
5
50ft (15.4m), balanced
stereo audio/control
cable
Connect RC unit to the SV-551
1 1
The SV-551 system EQ and LEVEL settings have been optimized for Kramer's
dedicated, 15.2m, pre-cut CAT cable. We recommend using these cables for your
SummitView installations whenever possible.
When making custom cables from Kramer bulk cabling, you should limit cable
length to between 4m and 30m. Using shorter or longer cables may result in lower
image quality.
The Kramer recommended cables should be used as they have been tested to work
with the system. Using other cables may result in lower image quality and different
supported cable lengths than specified.
11 Supplied in Kits with US wall plates and in regions where Plenum cables are required
2 Supplied in kits with US wall plates and in regions where plenum cables are not required
3 Supplied in kits with EU wall plates
4 Supplied in kits in regions where plenum cables are required
5 Supplied in kits in regions where plenum cables are not required